Affalterbach Shifter and Command controller
#1
Affalterbach Shifter and Command controller
I know a lot of people including myself were interested in the Affalterbach Edition shifter. I priced it at the dealer and it was over $1,000 AUS and you had to buy the whole shifter and boot apparently.
I decided to make my own and also did the command controller knob.
I decided to make my own and also did the command controller knob.
#4
Very easy. Bought 2 emblems and removed the backing tape that was on them and used my own. Normal double sided tape on shifter and 2 layers of 3M tape on Command controller. They cost me around $20 each plus shipping. I bought them from here http://www.myroadster.net/
#5
MBWorld Fanatic!
Joined: Dec 2006
Posts: 3,278
Likes: 3
From: Livingston NJ
C63, Grigio Medio E46 M3
Very easy. Bought 2 emblems and removed the backing tape that was on them and used my own. Normal double sided tape on shifter and 2 layers of 3M tape on Command controller. They cost me around $20 each plus shipping. I bought them from here http://www.myroadster.net/
#6
Sorry. here you go http://www.formymercedes.com/morepic...mg7=s-19-7.jpg
You can email ger.jones@comcast.net and ask for the emblems on there own
You can email ger.jones@comcast.net and ask for the emblems on there own
Trending Topics
#15
I wrote then an email a few days ago but didnt get any response.
Where can I find the emblem on their website?
EDIT: I read your previous post that you have to ask for the emblems. I'll write them another email.
Where can I find the emblem on their website?
EDIT: I read your previous post that you have to ask for the emblems. I'll write them another email.
Last edited by olszowa12; 01-28-2011 at 04:31 AM.
#17
I received my emblem from Jerry a ForMyMercedes but I'm not happy about the way it's glued on top of the original gear shifter emblem.
Does anyone know if we can take out the old emblem and insert a new one?
Does anyone know if we can take out the old emblem and insert a new one?
#18
MBWorld Fanatic!
Joined: Apr 2009
Posts: 5,995
Likes: 516
From: Alexandria, VA
07 E63 AMG, 10 C63 AMG, 07 E63 Designo, 07 E350, 09 C300, 07 C230
I don't know if you can remove the original MB decal. But I would just remove the adhesive tape that came with the Affalterbach Crest, and glue it on. That way it will lay flat on top of the original. Just my two cents
#20
I want to keep my original shift knob. I don't think the 100bucks knob are covered with leather.
Last edited by olszowa12; 02-16-2011 at 01:32 PM.
#21
true no leather OEMs, they have this one in CF tho, pretty nice
http://www.formymercedes.com/morepic...mg7=s-19-7.jpg
http://www.formymercedes.com/morepic...mg7=s-19-7.jpg
#22
#23
When did you order it? I emailed him & he told me that he was out of them.
#25
You need to remove the white tape that the emblem came with when you bought it off Jerry. I then used very thin double sided tape and stuck it over the top of MB emblem on the shifter. Have a look at my the pics on the first post.