19" HRE M40 :PICS:
#26
MBWorld Fanatic!
Join Date: Oct 2009
Location: San Diego, CA
Posts: 2,771
Likes: 0
Received 0 Likes
on
0 Posts
'13 GT-R AMS Alpha 9+, CLA45, E55
To answer your lug question, you're gonna need Conical seat lugs for these beauties. Get some black ones from Craig @ RPM. They will look SIIIICK!
#28
MBWorld Fanatic!
Thread Starter
#29
MBWorld Fanatic!
Thread Starter
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#30
Banned
Join Date: Sep 2008
Location: San Diego, CA
Posts: 1,694
Likes: 0
Received 2 Likes
on
2 Posts
07 RS4 sold, R53 Cooper S, 2008 Cayman S, 2012 GTR
Hey guys I just had a few questions....
1.) Will the stock lugs work with these wheels or do I need different length lugs?
2.) I am thinking of lowering the car later on with H&R springs, Will a 245 front & 275 rear tire be suitable for this or should I go with 235 front & 265 rear?
I am going with Hankook tires so they don't run very wide like the Michellin or Continental tires. Im guessing the 245-275 Hankook combo will be ok but im not 100% sure. Any feedback would be greatly appreciated.
1.) Will the stock lugs work with these wheels or do I need different length lugs?
2.) I am thinking of lowering the car later on with H&R springs, Will a 245 front & 275 rear tire be suitable for this or should I go with 235 front & 265 rear?
I am going with Hankook tires so they don't run very wide like the Michellin or Continental tires. Im guessing the 245-275 Hankook combo will be ok but im not 100% sure. Any feedback would be greatly appreciated.
If you dont mind me asking, why did you decide to run only a 19x9 on the rears? I would suggest the 235/35 19 since you have such an aggressive offset on the front, I would do the 265/30 19 since your putting them on a 9 but the 275/30 19's will work just fine.
the P40's we just got are Gloss Charcoal 19x8.5 et48 weighed 22.6 lbs, and the 19x9.5 et50 came in at 23.8lbs
#31
Administrator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
Join Date: Nov 2001
Location: THE Orange County, California
Posts: 11,921
Received 796 Likes
on
495 Posts
2020 Audi R8 V10, 2016 AMG GTS, 2018 E63S Edition 1, 2018 Porsche GTS Cab, 2012 C63 BS
You said P40--- these are M40's and are yours the P40(S) which is the lightweight version- and are yours for benzes? I ask cause the 40 series for Benzes are M.
#32
Banned
Join Date: Sep 2008
Location: San Diego, CA
Posts: 1,694
Likes: 0
Received 2 Likes
on
2 Posts
07 RS4 sold, R53 Cooper S, 2008 Cayman S, 2012 GTR
Good catch vic, i didnt notice AMG stated M40's
the M Series was technically discontinued back in 2009, and was moved to the P series, the current monoblock lines are:
Motorsport:
R40 available in 18" with 17" coming soon
R50 is in the works and will be available in 18"
Street:
P40 19-20"
P40S 19-20"
CL40 (centerlock) 19" with 20" coming soon
Luxury:
P40L 21-22"
P50L 22"
Motorsport:
R40 available in 18" with 17" coming soon
R50 is in the works and will be available in 18"
Street:
P40 19-20"
P40S 19-20"
CL40 (centerlock) 19" with 20" coming soon
Luxury:
P40L 21-22"
P50L 22"
#33
MBWorld Fanatic!
Thread Starter
Most if not all of the HRE Monoblok are built to use the factory lug bolts... the set that we just picked up for a C63 were ball seat.
If you dont mind me asking, why did you decide to run only a 19x9 on the rears? I would suggest the 235/35 19 since you have such an aggressive offset on the front, I would do the 265/30 19 since your putting them on a 9 but the 275/30 19's will work just fine.
If you dont mind me asking, why did you decide to run only a 19x9 on the rears? I would suggest the 235/35 19 since you have such an aggressive offset on the front, I would do the 265/30 19 since your putting them on a 9 but the 275/30 19's will work just fine.
Last edited by _AMG_; 02-10-2011 at 06:42 PM.
#34
MBWorld Fanatic!
The fronts are going to stick out 16 mm more than stock.
http://www.1010tires.com/wheeloffsetcalculator.asp
http://www.1010tires.com/wheeloffsetcalculator.asp
#35
MBWorld Fanatic!
The fronts are going to stick out 16 mm more than stock.
http://www.1010tires.com/wheeloffsetcalculator.asp
http://www.1010tires.com/wheeloffsetcalculator.asp
#39
#41
Member
Join Date: May 2006
Location: West Palm Beach.FL
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
//AMG C55/C180/Hondacbr600rr
bmw
http://www.autotrader.com/fyc/vdp.js...standard=false
#42
MBWorld Fanatic!
Thread Starter
The fronts are going to stick out 16 mm more than stock.
http://www.1010tires.com/wheeloffsetcalculator.asp
http://www.1010tires.com/wheeloffsetcalculator.asp
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
![Scared](https://mbworld.org/forums/images/smilies/scared.gif)
Me too!! I was at work just wishing I had the tires put on them all ready. Soon....Very soon.
Matte black.
Im hoping I see some of Vic55's cars there also so I can take pics. I would love to make it out there.
#43
MBWorld Fanatic!
Thread Starter
Ok so tonight I did a test fitment of the HRE's and the front fitment is very aggressive like most of you guys said, BUT it looks great!! It looks very close to being flush with the fenders and I think ill be good to go with the 235 tire setup and H&R springs ![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
Might even go with KW V3's.
*HRE confirmed the widths and offsets are specifically for the C63*
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
Might even go with KW V3's.
*HRE confirmed the widths and offsets are specifically for the C63*
Last edited by _AMG_; 02-11-2011 at 02:21 AM.
#44
u dont have to come at 6 i usually get there around 7-7:15 and i still get a spot inside . .. we should set one up one of these days we could all go
http://irvine.carsandcoffee.info/directions.php
http://irvine.carsandcoffee.info/directions.php
#45
MBWorld Fanatic!
Thread Starter
u dont have to come at 6 i usually get there around 7-7:15 and i still get a spot inside . .. we should set one up one of these days we could all go
http://irvine.carsandcoffee.info/directions.php
http://irvine.carsandcoffee.info/directions.php
Ive never been there but it sounds like fun.
#47
MBWorld Fanatic!
Join Date: Jul 2008
Location: Massachusetts
Posts: 1,021
Likes: 0
Received 0 Likes
on
0 Posts
'14 911S (garage queen) '13 X3 (family hauler)
_AMG_ nice rims, can't wait to see 'em on!![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
It will compliment your aggressive look nicely.
Happy to see you're leaving your exhaust alone for the time being![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
congrats
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
It will compliment your aggressive look nicely.
Happy to see you're leaving your exhaust alone for the time being
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
congrats
#49
MBWorld Fanatic!
Thread Starter
Ya, Im done messing with my exhaust if I were to do anything else to it I would just go with LTH's.