Damn CEL came on, installed K&N few days ago... go to dealer?
#26
Junior Member
Join Date: May 2011
Location: League City, TX
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
2008 C63 AMG
#27
Junior Member
Join Date: May 2011
Location: League City, TX
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
2008 C63 AMG
Ya know, I am not sure this is an issue with just the K&N's right? I thought I read where someone else had used a different brand and had the same issues.
I find it hard to believe it's the actual filter causing this issue. Yes it flows more air, but not THAT much more. Can any of the tuners chime in here and tell us if they have had it on a dyno where this issue has occurred and what did the AFR's say? Can they confirm that it is leaning it out? If so, can they adjust the fuel table?
I find it hard to believe it's the actual filter causing this issue. Yes it flows more air, but not THAT much more. Can any of the tuners chime in here and tell us if they have had it on a dyno where this issue has occurred and what did the AFR's say? Can they confirm that it is leaning it out? If so, can they adjust the fuel table?
#28
MBWorld Fanatic!
Sometime the oil that is contained within the K&N filter coats the MAF sensor, could this be the reason for the CEL?
#29
Junior Member
Join Date: May 2011
Location: League City, TX
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
2008 C63 AMG
Yuill... I guess it could, which would give the MAF false readings. But I would think it would take a WHOLE bunch of oil to do this, wouldn't it? Why don't other cars that use MAF sensors have this same issue, though?
I do not have any experience with these cars, but I have had quite a few FI cars that use MAF sensors and never heard of this issue before.
For the OP, or anyone that has had this issue, did the CEl code say it was the MAF sensor or does anyone have the code it throws? I'm just wondering if this could be an o2 problem, that is being diagnosed as something else. Please understand, I am not trying to discredit anyone or dispute anyone else's findings, I am just trying to understand this so we can figure out how to fix it.
I do not have any experience with these cars, but I have had quite a few FI cars that use MAF sensors and never heard of this issue before.
For the OP, or anyone that has had this issue, did the CEl code say it was the MAF sensor or does anyone have the code it throws? I'm just wondering if this could be an o2 problem, that is being diagnosed as something else. Please understand, I am not trying to discredit anyone or dispute anyone else's findings, I am just trying to understand this so we can figure out how to fix it.
#30
Super Member
Thread Starter
Join Date: Mar 2011
Location: Huntington Beach, CA
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
c63, 11 e350 (DD)
Yuill... I guess it could, which would give the MAF false readings. But I would think it would take a WHOLE bunch of oil to do this, wouldn't it? Why don't other cars that use MAF sensors have this same issue, though?
I do not have any experience with these cars, but I have had quite a few FI cars that use MAF sensors and never heard of this issue before.
For the OP, or anyone that has had this issue, did the CEl code say it was the MAF sensor or does anyone have the code it throws? I'm just wondering if this could be an o2 problem, that is being diagnosed as something else. Please understand, I am not trying to discredit anyone or dispute anyone else's findings, I am just trying to understand this so we can figure out how to fix it.
I do not have any experience with these cars, but I have had quite a few FI cars that use MAF sensors and never heard of this issue before.
For the OP, or anyone that has had this issue, did the CEl code say it was the MAF sensor or does anyone have the code it throws? I'm just wondering if this could be an o2 problem, that is being diagnosed as something else. Please understand, I am not trying to discredit anyone or dispute anyone else's findings, I am just trying to understand this so we can figure out how to fix it.
BTW, what kind of x-pipe do you have? How do you like the sound? Any vid?
I'm also thinking about getting an x to delete the seconds cats, and also deleting the resonators. Any CEL from it? lol
#31
Junior Member
Join Date: May 2011
Location: League City, TX
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
2008 C63 AMG
Haven't found out what code it is, I don't have a scanner, but people that have had the same problem said "running too lean" codes were thrown out.
BTW, what kind of x-pipe do you have? How do you like the sound? Any vid?
I'm also thinking about getting an x to delete the seconds cats, and also deleting the resonators. Any CEL from it? lol
BTW, what kind of x-pipe do you have? How do you like the sound? Any vid?
I'm also thinking about getting an x to delete the seconds cats, and also deleting the resonators. Any CEL from it? lol
As for the x-pipe, I pm'd you so I don't get this thread off track. But no CEL lights as of now from the x-pipe and I've had it for a couple weeks now.
#32
MBWorld Fanatic!
You can go to any Autozone and they will scan it for free. They can even clear it for you as well. I bought a scanner there and has been an invaluable tool in the past few years. I'd love to know the code it throws.
As for the x-pipe, I pm'd you so I don't get this thread off track. But no CEL lights as of now from the x-pipe and I've had it for a couple weeks now.
As for the x-pipe, I pm'd you so I don't get this thread off track. But no CEL lights as of now from the x-pipe and I've had it for a couple weeks now.
Which scanner did you pick up?
#33
MBWorld Fanatic!
#35
MBWorld Fanatic!
#36
You can go to any Autozone and they will scan it for free. They can even clear it for you as well. I bought a scanner there and has been an invaluable tool in the past few years. I'd love to know the code it throws.
As for the x-pipe, I pm'd you so I don't get this thread off track. But no CEL lights as of now from the x-pipe and I've had it for a couple weeks now.
As for the x-pipe, I pm'd you so I don't get this thread off track. But no CEL lights as of now from the x-pipe and I've had it for a couple weeks now.
That's what I was told from every auto parts store I've asked this about.
#38
MBWorld Fanatic!
K&N has in the past discountinued filters for certain models of cars as they would cause CEL or fail. I had a K&N on my 993 that ripped at the edges about every 1,000 miles. After three warranty replacements from K&N, they sent my money back and two stock filters. They discontinued the filter shortly thereafter.
#39
MBWorld Fanatic!
Put the stock filters back in or try different ones like AFE Pro Dry-S filters.
I have had my K&N's for about 7k-8k with no problem.
I have had my K&N's for about 7k-8k with no problem.
Last edited by _AMG_; 06-17-2011 at 03:09 AM.
#40
Former Vendor of MBWorld
what need to do is clear the code, see if it comes back with the K&N. If it does, i would clear the code and then i would put the stock back in, and see if it comes on or not. Then you know if it is a filter issue or not.
#41
MBWorld Fanatic!