Has anyone monitored their Air Fuel ratio driving ?
#1
MBWorld Fanatic!
Thread Starter
Has anyone monitored their Air Fuel ratio driving ?
I took a wide band AF and hooked it up to the secondary O2 sensors.. I dont have any cats..
Cruising AF was around 14 - 14.5 and WOT was 12.5 - 13..
Pretty happy with these results...
Cruising AF was around 14 - 14.5 and WOT was 12.5 - 13..
Pretty happy with these results...
#3
MBWorld Fanatic!
Thread Starter
I just used a 300$ monitor my dad uses to tune his muscle cars..
It plugged into the bung and worked great.. I dont have the model or anything, but Im sure you could find something have decent at the local performance shop.
Good to know where you're at in regards to AF for peace of mind. IMO
It plugged into the bung and worked great.. I dont have the model or anything, but Im sure you could find something have decent at the local performance shop.
Good to know where you're at in regards to AF for peace of mind. IMO
#5
MBWorld Fanatic!
Thread Starter
Cruise jumps around a bit more, but WOT was solid at 12.5-13 range.
Id like to find something that could tell me if the ECU is pulling timing... Anyone know of anything that could do that?
Id like to find something that could tell me if the ECU is pulling timing... Anyone know of anything that could do that?
#6
Senior Member
Join Date: Aug 2008
Location: South Africa
Posts: 272
Likes: 0
Received 1 Like
on
1 Post
2008 C63 AMG
http://www.dashdaq.com/features/gauges.htm
#7
MBWorld Fanatic!
I have a wideband gauge in my car that I added, very useful especially back when I was running nitrous and swapping back and forth between a couple different ECUs.
Trending Topics
#8
MBWorld Fanatic!
Thread Starter
I use this. You can log quite a few things. 52 different fields to be exact. Also clears faults.
http://www.dashdaq.com/features/gauges.htm
http://www.dashdaq.com/features/gauges.htm
#10
MBWorld Fanatic!
Ive used the Dash Dyno, hooks up to your OBDII port and could monitor your AFR's while driving. Don't know how accurate it is but its a cool little gadget.
On the dyno my AFR's were between 12.5-13 at WOT, don't remember exactly.
On the dyno my AFR's were between 12.5-13 at WOT, don't remember exactly.
#11
SPONSOR
Join Date: Dec 2010
Location: Santa Ana, CA
Posts: 5,700
Received 131 Likes
on
115 Posts
OE Tuning C63 AMG
For decent wideband logging, install Zietronics & wideband O2s for logging with a DashDaq. 55K guys have been doing this for sometime.....
LM2 from Innovative is what I use on the street.
DAS and Xentry can do this too.
LM2 from Innovative is what I use on the street.
DAS and Xentry can do this too.
#12
MBWorld Fanatic!
Thread Starter
Is there anything that can monitor the ignition timing, knock senors and tell me if the car is pulling timing?
#13
MBWorld Fanatic!
I use this. You can log quite a few things. 52 different fields to be exact. Also clears faults.
http://www.dashdaq.com/features/gauges.htm
http://www.dashdaq.com/features/gauges.htm
#14
MBWorld Fanatic!
Join Date: Mar 2004
Location: North NJ
Posts: 2,073
Likes: 0
Received 27 Likes
on
25 Posts
2002 C32 AMG, 2013 GLK 350/4, 2015 E63S AMG Wagon
DashDaq does monitor timing. Also fuel trim. For the knock sensor, you can use Phormula ks-3 or ks-4 or tap into the existing knock signal and have DasDaq monitor it too.
#16
Senior Member
Join Date: Aug 2008
Location: South Africa
Posts: 272
Likes: 0
Received 1 Like
on
1 Post
2008 C63 AMG
I have found that the bung in exhaust and Dash Daq display identical lambda values (Bear in mond that I am catless).
Ever since I have the Dash Daq I hardly dyno my car. I measure airflow, check timing figures, lambda.
It helps you understand waht your car does in different conditions like hot vs cold, pump fuel vs race fuel, low altitude vs high altitiude, etc
If you want you can add Zeitronix AFR bung to Dash Daq and EGT sensors, etc.
Brilliant device.
#17
MBWorld Fanatic!
Thread Starter
So this dasdaq will tell me if the car is pulling timing in different conditions? Will it display accurate air fuel too?? I just want to make absolutely sure before I buy it, thanks guys.
Whats LAMBDA values??
Whats LAMBDA values??
Last edited by Merc63; 02-15-2012 at 02:07 PM.
#18
SPONSOR
Join Date: Dec 2010
Location: Santa Ana, CA
Posts: 5,700
Received 131 Likes
on
115 Posts
OE Tuning C63 AMG
Lambda is a measurement of mixture. Lambda 1 = 14.7 AFR
#19
MBWorld Fanatic!
Join Date: Mar 2004
Location: North NJ
Posts: 2,073
Likes: 0
Received 27 Likes
on
25 Posts
2002 C32 AMG, 2013 GLK 350/4, 2015 E63S AMG Wagon
Here is a sample screen print of info you can get with Zeitronix and DashDaq combo. You can also record all of this through the DashDaq to an SD card and send it to a tuner of your choice from the track. And if you spend a few more $$ on a special cable, you tuner can send you updates to your file while you are still at the track.
![](https://mbworld.org/forums/attachments/c32-amg-c55-amg-w203/224631d1324388710-eurocharged-amg-speed-shift-tcu-flash-499-12-20-2011-8-41-44-am.jpg)
#20
Senior Member
Join Date: Mar 2012
Location: East Coast, USA
Posts: 492
Likes: 0
Received 0 Likes
on
0 Posts
AMG
I recognize this is an old thread however I am in market for a data logger for AFR and was looking that Dashdaq. Do I really need to get the Zt-2 also or just Dashdaq is enough? Car in question is 13 e63 amg biturbo
#21
MBWorld Fanatic!
Join Date: Feb 2010
Posts: 5,517
Received 434 Likes
on
357 Posts
2012 C63;1971 280SE 3.5(Sold);2023 EQS 450 SUV 4 Matic (Wife's)
Read post #18 above. Yes you need both for accurate results. There are also several other wideband sensors that are supported.
Last edited by Mort; 11-06-2013 at 07:24 PM.
#25
MBWorld Fanatic!
Join Date: May 2004
Location: Portugal
Posts: 1,479
Likes: 0
Received 4 Likes
on
4 Posts
'08 CLK320CDI AMG// '13 E500 Coupe AMG// '17 E350d AMG
With LM-2 we can add extra sensors like in the ZT-2?
For what I read LM-2 can log OBD2 data and O2 only or I'm wrong?
With zeitronix ZT-2 without dashdaq we cannot read from OBD2 or there is another way?
I checked PCMSCAN software and they support ZT-2 as an aux input but don't know if it will read also from extra sensors plugged in to zt-2!
https://palmerperformance.com/produc...lpro/index.php
For what I read LM-2 can log OBD2 data and O2 only or I'm wrong?
With zeitronix ZT-2 without dashdaq we cannot read from OBD2 or there is another way?
I checked PCMSCAN software and they support ZT-2 as an aux input but don't know if it will read also from extra sensors plugged in to zt-2!
https://palmerperformance.com/produc...lpro/index.php