Quick DIY: easy install of aftermarket C63 / W204 front and rear AMG door pins
I'm with my kids in the back seat and I realize the ugly plastic pins are tall enough to grab and pull up to unlock and exit the car in an emergency or accident.
In the front, the handle opens a locked door, but not in the back. Am I missing something?
Those of you with this install... Can you open a locked door from the back without the driver electrically unlocking?
Last edited by Dogtag114; Aug 5, 2012 at 09:47 PM.
am i royally screwed here? I assume I'm going to have to take it to the dealer and get it fixed. anyone know approximately how much that's gonna run me? or do i have any alternative options by any chance?




GL
One thing I did when I installed the fronts was used teflon tape on the threads of the lock rod.
By doing this, I am able to rotate the knob exactly the way I want it to look (both for height and to have the AMG read the way I want) without it possibly still being loose.
On the rears, I agree that you have to use some type of adhesive. I used a drop or two of super glue. Worked just fine.
Any clues on how to remove the door trim to get inside and have a look around at what I have done? Also my real problem i think will be removing the trim with the door closed, but if i can get into the other rear door it may give me some clues
PS its a 2012 C63
Thanks
The Best of Mercedes & AMG
Any clues on how to remove the door trim to get inside and have a look around at what I have done? Also my real problem i think will be removing the trim with the door closed, but if i can get into the other rear door it may give me some clues
PS its a 2012 C63
Thanks




