Part # For 2012 Front Bumper
Also, does anyone know if it would direct plug and play coming from an '08 with the round fog lights? Would I be getting error messages all the time?
I recently ordered the Revo F1 bumper and am going to try to retrofit the fog lamp wiring harness to work with them, so that I will be able to use the dash set-up and light switch knob as OEM intended. I have heard from a few vendors that have sold them that they haven't heard any negative feedback from anyone who has gotten the LED's and had any issues. Even though they are different bumpers, same LED's, so let's keep our fingers crossed!!
Last edited by jordanaf; Oct 31, 2012 at 07:59 PM.
Trending Topics
I recently ordered the Revo F1 bumper and am going to try to retrofit the fog lamp wiring harness to work with them, so that I will be able to use the dash set-up and light switch knob as OEM intended. I have heard from a few vendors that have sold them tat they haven't heard any negative feedback from anyone who has gotten the LED's and had any issues. Even though they are different bumpers, same LED's, so let's keep our fingers crossed!!
Well keep us posted (both) as I'm interested in getting those LED DRL.
I have a question though: when you enable DRL from your car settings menu does it turn up your xenons? Mine does. So I'm wondering if we hook up the 2012 front bumper will it turn on the xenons + LEDs?
The Best of Mercedes & AMG
bodyshop has to cut out the holes for the sidemarkers...
trust me, i unfortunately had to replace the bumper on my car recently.
http://www.parts.com/parts/2012/MERC...agramCallOut=1
found that they finally have the front bumpers on parts.com. i don't have parking sensors so it would only be $564 for a brand new, unpainted bumper. it's actually about $30 cheaper than the pre-facelift bumper. i'm not sure if it comes with the DRL though or if that has to be bought separately. I also haven't been able to figure out if it's simple to go from the regular fog lights to the LED DRL without getting errors on the screen and whatnot. If I can figure that out in the near future, I'm going to jump on this and get it going.











