What's your opinion about Finevu CR500HD so far?
Do you like your CR500HD?
I hate mine!
Here's my problem:
I bought the power save box and CR500HD.
My hous-güru mechanic who does all service on my car connected my PSB to the main powersupply loom below the dash.
It's a thick red wire.
Now for functionality:
When I start my car for take off, my camera doesn't power up in blue mode for normal recording!
It's completely DEAD!
I have set the switch to power ON, a green light is illuminating on PSB.
My camera is still dead!
I have to start and turn off my ignition maybe 3-4 times for my camera to wake up recording?!
I don't know what's wrong with my Finevu CR500HD?
When I take off, I expect my camera to start recording at once and not after 3 - 4 cycles of start 'n' shut off!
I don't shut off my car for my camera to begin recording, it's when I go out driving my car and I park it somewhere and do errands.
After 3-4 times, my camera wakes up from the dead if I'm lucky and starts recording?
I shouldn't be like this?
What to do besides contacting Alex at BBMC?
Why isn't he a sponsor here anymore?
I need your opinions of your own ownership of this camera.
I am very disapointed with my CR500HD!
Thanks
Last edited by KJI3jflarryfe93; Jun 8, 2013 at 10:05 AM.
Not one issue. Been using it for months.
I would start with how you wired it. You should follow how BBMC installs them (To trunk fuse box)
Good luck!
Reach out to Alex. He's a nice and helpful guy.
there's only 1 wire with constand feed and it's covered in red color sleeve.
wire is thick.
I went out with my car today and this lousy camera was completely dead!
after 4rth time of re-starting my car after running my errands downtown it came back to life!
during this dead non function/recording time anything could happen with my car, I feel safer everytime when I drive my car because my camera when it works records everything in front of me.
my trunk in my C43 AMG I have only a small fusebox, that's it.
maybe it's connected to my factory tow-alarm?
when I park my car by the end of the day in my garage, I turn OFF the
PSB-safe switch, not to drain the battery during the night.
when I park my car outside in public area after a drive to the mall or to my work, I let the PSB-switch be in ON-mode for park mode recording.
could there be a problem if I switch OFF the PSB when I park my car by the end of the day?
This is Alex from Blackboxmycar.com
First, we are no longer a vendor because we were initially moving between forums to sell our line of procuts. Our line of products are short and we cannot afford to stay paid vendor for all our vendor sites
Besides, after the vendor period is over, we are unable to write or send any messages that gets sent into our account or gets written on the wall. We see that you are having an issue with your unit and we have sent in a ticket into FineVu's HQ. We take full responsibility of all our units and we have never left any customers with any issues
I am bit sad to see that you did not contact us directly and rather post up a post about an issue that you are facing... and we would have had no idea if you are facing an issues like these... We have answered all your questions about the unit upto this point very quickly and in detail...
We will let you know as soon as we hear from Finevu...
Sincerely,
Alex
Trending Topics
The Best of Mercedes & AMG
This is Alex from Blackboxmycar.com
First, we are no longer a vendor because we were initially moving between forums to sell our line of procuts. Our line of products are short and we cannot afford to stay paid vendor for all our vendor sites
Besides, after the vendor period is over, we are unable to write or send any messages that gets sent into our account or gets written on the wall. We see that you are having an issue with your unit and we have sent in a ticket into FineVu's HQ. We take full responsibility of all our units and we have never left any customers with any issues
I am bit sad to see that you did not contact us directly and rather post up a post about an issue that you are facing... and we would have had no idea if you are facing an issues like these... We have answered all your questions about the unit upto this point very quickly and in detail...
We will let you know as soon as we hear from Finevu...
Sincerely,
Alex
people always ask on forums if other forum members facing same issues with certain products.
I did not mean to diss you or your business, you have always been friendly and curtious to all us forum members
my problem is my camera, it makes me hate it everytime when it doesn't start recording automatically when I start my car for a drive.
There's for sure an issue with my CR500HD
However I don't know what's wrong with it?

When I depress the rear buttons M + ON/OFF for memorycard reset, camera works it gets temporary power and then it shuts off after a while, being completely dead!
Something is not right for sure?
Last edited by KJI3jflarryfe93; Jun 8, 2013 at 05:39 PM.
I did not mean to diss you or your business, you have always been friendly and curtious to all us forum members
my problem is my camera, it makes me hate it everytime when it doesn't start recording automatically when I start my car for a drive.
There's for sure an issue with my CR500HD
However I don't know what's wrong with it?

When I depress the rear buttons M + ON/OFF for memorycard reset, camera works it gets temporary power and then it shuts off after a while, being completely dead!
Something is not right for sure?

We understand that it can get very frustrating and I will make sure all your concerns are addressed in very professional manner. We have customers from all around the world and even if you are in Sweden, your unit will be fully fixed or replaced by FineVu.
To get this solved in more profesional order, I have sent this into FineVu's HQ.
However, in my opinion, there is a weak connection between the power cord into the power kit, or the power kit's negative end is not properly sealed in my opinion.
This sort of issue is usually encountered when the connection between earth(-'ve end) is not properly attached to the metal end. Sometimes the metal end is coated and this interferes with the good connection. However, this is just my thought for now and I would get back to you when I hear back from Finevu..
At this moment, I would check on the negative terminal of the power kit connection and perhaps check to see if the fuse is working well.
I am currently in Korea and it is 3:30AM, I would quickly follow up with your further questions when I wake up tomorrow and I will get back to you when I hear anything back from FineVu.
Best Regards,
Alex
on powerbox the switch when its turned ON, it illuminates a green bulb,
if there was a poor (-) negative ground connected to my car, the power save box wouldn't get proper juice from electrics in my car.
when I set the switch in position ON for PSB it stays ON all the time and illuminates the green bulb.
however my CR500HD still remains dead!
power save box receives constant juice but my CR500HD does NOT get any juice at all.
I don't think it's a wrong power connection when my PSB works all the time.
It's like my CR50HD works when it feels like, like a lazy donkey being stubborn and won't move forward without getting a carrot as a treat!
You are supposed to leave the battery protection box switch always on if you want to use park mode. It is possible that you wired the 3 wires to the wrong places. The "always on" lines do not actually stay always on in some parts of the car. In the rear fuse box they turn off after an hour. Also, if you have your battery sense dip switches in the wrong position set to some voltage above your battery voltage it will shut things off.
Read the directions.
You are supposed to leave the battery protection box switch always on if you want to use park mode. It is possible that you wired the 3 wires to the wrong places. The "always on" lines do not actually stay always on in some parts of the car. In the rear fuse box they turn off after an hour. Also, if you have your battery sense dip switches in the wrong position set to some voltage above your battery voltage it will shut things off.
Read the directions.
when i go out driving, i turn the killswitch into position ON, power save box works, but camera gets NO power!
power doesn't reach my camera!!

after a 3 or 4 time of driving loop with parking start/turn off cycle, my camera comes back to life from the dead like a frikkin' zombie!
when my powerbox works all the time and the camera doesn't, it must be something wrong with my Finevu!
i think i got a lemon!?

yesterday on Friday 14th i went out driving, i fired up my PSB w/o problems, camera was 100% dead!
after 3 time start/shut off driving/parking cycle, camera came back to life from the dead!
WTF!?
after a 2hr drive or so, my camera went back to the dead!?

it shut off by itself!
after 5 minutes it came back to life!?

when my PSB have constant power when I turn it on and my camera does not receive constant power then something is not right with my camera..................?!
there's nothing wrong with PS-box because it would also have behaved funky if there was something?
Last edited by KJI3jflarryfe93; Jun 15, 2013 at 05:23 AM.
Thanks again Alex for the help and assistance on the update on the firmware!
i haven't tried it yet as I don't have my car at home.
however I feel confident that everything will work out in a positive manner this time.
all of ya forum members please don't get any wrong assumptions from my first post, this was never an attempt to badmouth BBMC!
Blackboxmycar is a great and respectable shop to deal with.
i have full trust for bbmc.
we'll do business again.
thanks again Alex for all your help.
Last edited by KJI3jflarryfe93; Jul 23, 2013 at 11:33 AM.
when i go out driving, i turn the killswitch into position ON, power save box works, but camera gets NO power!
power doesn't reach my camera!!

after a 3 or 4 time of driving loop with parking start/turn off cycle, my camera comes back to life from the dead like a frikkin' zombie!
when my powerbox works all the time and the camera doesn't, it must be something wrong with my Finevu!
i think i got a lemon!?

yesterday on Friday 14th i went out driving, i fired up my PSB w/o problems, camera was 100% dead!
after 3 time start/shut off driving/parking cycle, camera came back to life from the dead!
WTF!?
after a 2hr drive or so, my camera went back to the dead!?

it shut off by itself!
after 5 minutes it came back to life!?

when my PSB have constant power when I turn it on and my camera does not receive constant power then something is not right with my camera..................?!
there's nothing wrong with PS-box because it would also have behaved funky if there was something?




