C63 Grill Removal and Updated Pictures of Single Fin
#51
MBWorld Fanatic!
To the OP thanks so much for the write up! Got me off my A$$ and finally wrapped my grill too.
I think you started a trend
I think you started a trend
#52
MBWorld Fanatic!
I got my grill last night. Got the right one. However, I'm not that thrilled with the quality. The center star looks good, but the quality of the chrome finish around the perimeter of the grill looks pretty weak up close. I'm concerned it might peel over time because I see some slight imperfections and bubbling along some of the edges. Can any of you guys confirm that yours is the same way?
The center star doesn't have this problem. Does anyone know if the center star is a genuine OEM star? The ebay description says it is, but I don't want to take it apart to check for fear I might break something.
The center star doesn't have this problem. Does anyone know if the center star is a genuine OEM star? The ebay description says it is, but I don't want to take it apart to check for fear I might break something.
#56
MBWorld Fanatic!
Join Date: Feb 2010
Posts: 5,517
Received 434 Likes
on
357 Posts
2012 C63;1971 280SE 3.5(Sold);2023 EQS 450 SUV 4 Matic (Wife's)
The chrome on our cars is polished stainless steel and not chromed steel. Test it with a magnet. Maybe this grill is stainless steel as well just not as well stamped out so the edges are a little rough. The star may be too difficult to set up a die for, on a limited production run, so they opted to use the OEM star.
#58
https://mbworld.org/g/album/316641#
#59
I have silver and all blacked out chrome. even the fog surrounds..
https://mbworld.org/g/album/316641#
https://mbworld.org/g/album/316641#
Just to be crystal clear, all the trim and grill have been wrapped correct not paint ?
What type of wrapping is that ?
Chris
#60
I have an old grill from a fender bender that I plastidipped for basement decoration... I'm no expert in application, but I find the color inconsistent and question the longevity thru northeast winters.
#61
Switched out my 2011 grill for a Tech55 single fin. As others have stated, if you look close the chrome isn't perfect around a couple edges, but overall I'm pleased. Great write up by the OP.
#62
Member
Join Date: Apr 2015
Location: out of town
Posts: 200
Received 31 Likes
on
26 Posts
2019 GLE 63S AMG, 2009 C63
Did mine a few weeks ago and never got around to posting a pic, so...
I simply sprayed the outside edges with some gloss black. This grill gave the front of car an entirely different and updated look that I'm happy with.
#66
Member
Lol, if you've ever popped open the hood, you'll see that it's screwed on with screws. All you need to do to remove the screws and put the new piece on and screw it back in.
#67
Senior Member
Sorry to bring up an old thread but this is the only thing in the recent few years on removing the grill... After talking off the plastic piece that sits on top and connects to the intake, do I just push the grill on the lower lip? I'm kind of afraid given I cracked a clip that way on the DRL plates.
#68
Sorry to bring up an old thread but this is the only thing in the recent few years on removing the grill... After talking off the plastic piece that sits on top and connects to the intake, do I just push the grill on the lower lip? I'm kind of afraid given I cracked a clip that way on the DRL plates.
find a you tube video on any c series grill removal... that’s what did... our is only slightly different but it gave me the confidence of where to push.
i recall being far out of my comfort zone on how hard I had to push but all was ok
#70
#71
Senior Member
Okay I got mine to come out. It is just pushing it in/up, but unlike all guides where the center's pushed first, I pushed my outside first.
I still think a C class grill will fit, just that top part will be a part of the whole grill instead of sitting on the lip of the hood... but might be harder to open the hood that way.
I still think a C class grill will fit, just that top part will be a part of the whole grill instead of sitting on the lip of the hood... but might be harder to open the hood that way.
#72
MBWorld Fanatic!
How is the quality of the black-mesh portion color wise? Is it spray painted where it can chip over time or is the black color-impregnated into the plastic?