Weistec Engineering Oil/Air Separator Group Buy 2014
That looks like condensation in the oil and it the same in the pan, drain it, cooler also, refill with proper oil, new filter and then go for a drive on the highway for twenty or thirty-fifty miles and let the engine get up to operating temps and burn the residual water out of the inside.
Not to scare you but how is the coolant level, added any or is it low, that goop is not what you would normally fine in a catch can or oil pan.
That looks like condensation in the oil and it the same in the pan, drain it, cooler also, refill with proper oil, new filter and then go for a drive on the highway for twenty or thirty-fifty miles and let the engine get up to operating temps and burn the residual water out of the inside.
Not to scare you but how is the coolant level, added any or is it low, that goop is not what you would normally fine in a catch can or oil pan.
yes i do start it let it idle then shut it down
i havernt done many kms at all since the install
ive been to the track 2 twice only in the last 6 months other then that it hasnt been driven much
i will have to check the oil when i get home but im pretty sure its fine
my coolant level is fine never no dramas with that
Drain that crap out of the car, no more idling. Do not drive the car with this goop in there, do the oil change and filter for sure.
Good Luck
Drain that crap out of the car, no more idling. Do not drive the car with this goop in there, do the oil change and filter for sure.
Good Luck
The Best of Mercedes & AMG
Maybe I should contact Weistec about a defective CC,
Top up engine with fresh oil, not from the CC, "what if" dirt or metal wool particles from the CC happen to drop into the CC and then you place that into your engine.




LOL....I think I will let mine fill up on its own. Watch out how you contact Weistec or JR may flame you...LOL.
I am hoping that means my intake manifold is relatively oil free.




Contact Us
Sales Hours Monday - Friday 9:00am - 5:00pm PST Phone
North America: 1 (877) WEISTEC (934-7832) - Option 1
International: (714) 202-0005
Fax
(888) 516-8219
Sales Department: Sales@weistec.com


