When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not really sure what ClemsonJeeper is referring to. There are lots of W204 C63s running Forgestar wheels. Wait for N4S to reply or contact them directly.
I'm referring to these specific Forgestar F14 wheels that are being advertised in this thread.
I ordered a set like 6 weeks ago from N4S and Tiko called me up a few days ago saying that they installed a set on a W204 and they rubbed in the rear.
So now I have to choose a new set of wheels that they know will fit without rubbing or having to roll the fender.
I'm referring to these specific Forgestar F14 wheels that are being advertised in this thread.
I ordered a set like 6 weeks ago from N4S and Tiko called me up a few days ago saying that they installed a set on a W204 and they rubbed in the rear.
So now I have to choose a new set of wheels that they know will fit without rubbing or having to roll the fender.
Hey members. Unfortunately with the F14 19" setup you will need to run a 265/30/19 in the rear and no Pirelli P Zero or Michelin PSS. Tire with a very round sidewall will rub. Now if you would like to run the 20" it will work without any issues because they do have a high offset, recommended tire size for the will be 245/30/20 front 285/25/20 rear. Forgestar does have the correct fitment with other models in a 19" application but after doing tests the 19" rears will rub if you hit hard bumps in the road.
What were the full measurements for the 19" set up that rubbed? Tiko, I know I spoke with you back in March about ordering a set of 19x8.5 & 19x10, but I just wasn't able to make it happen at the time. I've been digging for offset measurements for the setup I wanted, but I haven't found anything as of yet. So, especially for the rear, is there just not enough offset available to keep it from rubbing? What would be needed? I'm not planning on running the tires in question, just the Hankook Ventus V12 Evos so that part shouldn't be an issue.
What were the full measurements for the 19" set up that rubbed? Tiko, I know I spoke with you back in March about ordering a set of 19x8.5 & 19x10, but I just wasn't able to make it happen at the time. I've been digging for offset measurements for the setup I wanted, but I haven't found anything as of yet. So, especially for the rear, is there just not enough offset available to keep it from rubbing? What would be needed? I'm not planning on running the tires in question, just the Hankook Ventus V12 Evos so that part shouldn't be an issue.
Hello fellow members and car enthusiast. Here's a beautiful jet black C63 on a set of Forgestar F14 bronze burst. Complimenting the rear deck and carbon fiber rear diffuser was the perfect choice to keep that elegant yet sporty aggressive look. The blend of the two colors really brings out the best of AMG. Yet keeping the car intact Pirelli P1 was the icing on the cake. We would like to mention that there were no spacers or adapters used to clear the massive Brembo brakes. Performs without any rubbing. Direct fitment.
We love to hear your comments and suggestions.
is the car in the pic lowered at all? and can I get a price of this exact wheel size and color combo in the pictures please and thank you
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
