C63 Roof rails
10-12-2015, 10:46 AM
#2
MBWorld Fanatic!
Join Date: Nov 2014
Location: Olathe, KS
Posts: 2,533
Received 396 Likes
on
275 Posts
'13 C63 AMG P31
Not sure about pitting but the clear coat flaking off or peeling is common. https://mbworld.org/forums/c-class-w...g-peeling.html
There is also a link inside of where to get them if it isn't covered under warranty.
http://www.oediscountparts.com/partl...?siteid=215242
There is also a link inside of where to get them if it isn't covered under warranty.
http://www.oediscountparts.com/partl...?siteid=215242
10-12-2015, 05:38 PM
#3
Senior Member
Join Date: Feb 2013
Location: Melbourne, Australia
Posts: 385
Received 35 Likes
on
31 Posts
2010 C63
Clear coat is peeling on mine. My research shows it to be not uncommon however most MB dealers will pretend that they have not heard of it before.
I looked up how to take them out and from memory it was not hard.
If you can smooth the surface, vinyl wrapping may be a solution.
I looked up how to take them out and from memory it was not hard.
If you can smooth the surface, vinyl wrapping may be a solution.
10-12-2015, 06:50 PM
#4
Member
I hadn't thought about them maybe being covered under warranty. I had a C300 that they were replaced on and I watched the process. They literally pop up. If you start up by the windshield you can start it easily. It's just held in with pressure clips. Be careful if you're putting it back on too. The clips bend very easily which will cause the trim to be loose. This happened to me so I had to bend 
the clips back in place.
the clips back in place.
10-12-2015, 07:20 PM
#5
Junior Member
Thread Starter
Join Date: Oct 2015
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Amg
I hadn't thought about them maybe being covered under warranty. I had a C300 that they were replaced on and I watched the process. They literally pop up. If you start up by the windshield you can start it easily. It's just held in with pressure clips. Be careful if you're putting it back on too. The clips bend very easily which will cause the trim to be loose. This happened to me so I had to bend the clips back in place.
the clips back in place.
