CEL AND P0017 CODE--HELP
#1
CEL AND P0017 CODE--HELP
Started the car yesterday morning and it sounded and seemed fine. Pulled out of the driveway and starts to shake and loss in power. Ran the codes and got this:
P0301- Cylinder 1 misfire
P0302- Cylinder 2 misfire
P0303- Cylinder 3 misfire
P0304- Cylinder 4 misifire
P0017- Crankshaft position - camshaft position correlation bank 1 sensor b
I've seen a couple threads about P0016 and P0017 together but only one with P0017 alone.
Anyone have this issue or found results?
Car is an 09 with a eurocharged tune.
Thanks.
P0301- Cylinder 1 misfire
P0302- Cylinder 2 misfire
P0303- Cylinder 3 misfire
P0304- Cylinder 4 misifire
P0017- Crankshaft position - camshaft position correlation bank 1 sensor b
I've seen a couple threads about P0016 and P0017 together but only one with P0017 alone.
Anyone have this issue or found results?
Car is an 09 with a eurocharged tune.
Thanks.
#3
MBWorld Fanatic!
Joined: Feb 2010
Posts: 5,520
Likes: 435
2012 C63;1971 280SE 3.5(Sold);2023 EQS 450 SUV 4 Matic (Wife's)
#4
MBWorld Fanatic!
Joined: Jun 2008
Posts: 8,068
Likes: 2,849
From: Los Angeles
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
#5
I know this thread is getting old and very few replies but did anyone have anything to share? I have the same issue with my 2007 ML63, idles good but as soon as I put it in drive CEL, P0017, random misfires, etc. Saw a post from 2 years ago referring to a sticky cam adjuster? I checked all sensors, also replaced solenoid, no improvement.