Anyone looking to suit up with ultra racing bars?
05-23-2017, 12:32 AM
#30
Junior Member
I'm curious, would these provide any benefits to a Black Series? I feel like the chassis is stiff enough, as I get creaks as I drive diagonal in some very shallow grades.
05-23-2017, 06:53 AM
#31
MBWorld Fanatic!
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,045
Received 2,810 Likes
on
1,664 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
Of course the bars will. There are no chassis differences between the C63 coupe models (other than rear track width and suspension setup).
05-31-2017, 12:06 PM
#34
Member
Thread Starter
Little bit of an up date....
Contacted ultra racing directly. Naturally I want a better deal. Had to buy a few more sets then I really wanted to, they sold me the last six complete sets they have in stock for C63.
Rejected there first few quotes for a better re-quote, (did my best). I got the take it or leave it offer this afternoon. So yeah....
4050US / 6 complete sets = 675.00 US per set. + shipping from my place to your place.
3 sets available
Pm me if you want in. I won't be back home from work until the 22 June. You can send me cash for the bars when I'm back home and ready to ship
Contacted ultra racing directly. Naturally I want a better deal. Had to buy a few more sets then I really wanted to, they sold me the last six complete sets they have in stock for C63.
Rejected there first few quotes for a better re-quote, (did my best). I got the take it or leave it offer this afternoon. So yeah....
4050US / 6 complete sets = 675.00 US per set. + shipping from my place to your place.
3 sets available
Pm me if you want in. I won't be back home from work until the 22 June. You can send me cash for the bars when I'm back home and ready to ship
05-31-2017, 10:42 PM
#35
Member
Little bit of an up date....
Contacted ultra racing directly. Naturally I want a better deal. Had to buy a few more sets then I really wanted to, they sold me the last six complete sets they have in stock for C63.
Rejected there first few quotes for a better re-quote, (did my best). I got the take it or leave it offer this afternoon. So yeah....
4050US / 6 complete sets = 675.00 US per set. + shipping from my place to your place.
3 sets available
Pm me if you want in. I won't be back home from work until the 22 June. You can send me cash for the bars when I'm back home and ready to ship
Contacted ultra racing directly. Naturally I want a better deal. Had to buy a few more sets then I really wanted to, they sold me the last six complete sets they have in stock for C63.
Rejected there first few quotes for a better re-quote, (did my best). I got the take it or leave it offer this afternoon. So yeah....
4050US / 6 complete sets = 675.00 US per set. + shipping from my place to your place.
3 sets available
Pm me if you want in. I won't be back home from work until the 22 June. You can send me cash for the bars when I'm back home and ready to ship
I'm interested but i'm located in China, so shipping from USA makes no sense.
Where do they ship from? I guess they are in Asia, if not in China? Could they ship one set directly to China?
If you don't want to bother with my "special case", could you please share with me your contact at ultra racing and i'll get in touch with them directly.
The following users liked this post:
jd_hinks (06-01-2017)
06-01-2017, 12:18 AM
#36
Member
Thread Starter
jd_hinks Thanks a lot for your initiative and bargain with Ultra racing.
I'm interested but i'm located in China, so shipping from USA makes no sense.
Where do they ship from? I guess they are in Asia, if not in China? Could they ship one set directly to China?
If you don't want to bother with my "special case", could you please share with me your contact at ultra racing and i'll get in touch with them directly.
I'm interested but i'm located in China, so shipping from USA makes no sense.
Where do they ship from? I guess they are in Asia, if not in China? Could they ship one set directly to China?
If you don't want to bother with my "special case", could you please share with me your contact at ultra racing and i'll get in touch with them directly.
The following users liked this post:
julours (06-01-2017)
06-25-2017, 03:12 PM
#40
Member
JD,
I sent you a PM, thanks for the response. Can you clarify exactly what pieces are in each "set"?
Also how difficult is the install? I don't have a lift.
I sent you a PM, thanks for the response. Can you clarify exactly what pieces are in each "set"?
Also how difficult is the install? I don't have a lift.
06-25-2017, 11:00 PM
#42
Member
Thread Starter
Hey Brian.
So pictures above are what's included in the 6 piece set. Front and rear strut bars should be easy. All the bars under the car should be straight forward after you remove the splash trays. A hoist would be easiest to do the install for bottom bars. I do not have much experience with this install other than what I have read from other forum members. Most of the guys with the bars had the lower ones installed at a shop.
Hope this helps.
So pictures above are what's included in the 6 piece set. Front and rear strut bars should be easy. All the bars under the car should be straight forward after you remove the splash trays. A hoist would be easiest to do the install for bottom bars. I do not have much experience with this install other than what I have read from other forum members. Most of the guys with the bars had the lower ones installed at a shop.
Hope this helps.
06-30-2017, 07:15 PM
#44
Member
Thread Starter
Originally Posted by Mazspeed
Can we just get specific ones? Not the entire kit? Thanks
06-30-2017, 08:38 PM
#45
MBWorld Fanatic!
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,045
Received 2,810 Likes
on
1,664 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
Just get the full set Maz, it's worth it. You can sell any spare bars on eBay.
The following users liked this post:
BLKROKT (07-31-2017)
07-01-2017, 02:40 AM
#47
Member
Thread Starter
Originally Posted by Mazspeed
OK, someone just contacted me for a split set. If not I will take a full set. Thanks for the advice Jim. May do just that.
07-01-2017, 11:07 AM
#49
07-01-2017, 07:15 PM
#50
Member
Thread Starter
Originally Posted by LSAMG
hey JD
Im looking to work this out with Maz. can you send my what you paid for those two bars, so we will know how much has to be paid
thx
Im looking to work this out with Maz. can you send my what you paid for those two bars, so we will know how much has to be paid
thx
I paid not individual but on a per set basis thru Ultra racing. Honestly 300.00 for the upper bars would be fair if you guys wanted to split it up. Hope this helps.
