When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What brand tint and percentage? I’ve been contemplating this for years, but always worried about it distorting my vision.
XPEL PRIME XR PLUS. 50%. Looks a bit darker than 50% on the pic but that's the angle / lighting I'd say. http://www.xpel.com/prime-xr-plus/
I would do it. Vision is not distorted one bit. The fact that it blocks the heat is very noticeable and pleasant.
At times the reflection of the dashboard into the inside of the windshield is a bit more noticeable but that's all (when very sunny). But I can drive without my sunglasses and its fine. Nighttime driving is not as good on a road that is not illuminated. Incomming lights are a bit more bothering.
Haven't done anything lately as I am 4400km away from my car while I'm working but I did recently order the motor and transmission mounts from East Coast Euro and the 10.25" Android head unit from CKM Car Design. So I will be installing those in my 2013 P31 Coupe when I return home!
Welded some midpipes with Magnaflow high flow cats and Vibrant race mufflers over the weekend. Next set of mods is Zeitronix Zt-4 dual wideband A/F meter and HP Tuners.
Welded some midpipes with Magnaflow high flow cats and Vibrant race mufflers over the weekend. Next set of mods is Zeitronix Zt-4 dual wideband A/F meter and HP Tuners.
Just switched over from Mobil 1 on my 2003 E500 W211 based upon recommendations of some of the E55 guys. Also added a can of the Ceratec friction modifier by Liquid Moly. Car runs smoother and engine is definitely quieter throughout the RPM range.
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
4 sessions at NJMP Thunderbolt this morning when the track was dry in between storm systems. That track is brutal on tires, rough surface and a bunch of reducing-radius long turns, car just doesn’t like it that much. Got in a bunch of 1:32-34’s in traffic (with turn 3-5 chicane) and called it a day. Home for lunch, been researching 19x10F and 19x12R wheel offsets and how to cut fenders since. Good day.