DadCar

Any idea how to fix this? The projector wiggles around very easily inside the housing. Video for reference:

https://www.youtube.com/watch?v=oXfHffCUOl8

DadCar

Just following up up on this in case someone else has the same problem. I found this video on youtube, and you can see a raised pin on top of the projector towards the front, someone in the comments recommended pushing it down with a screwdriver. I was able to reach my hand in and push it down, and the projector doesn't wobble around anymore!

Amr_c63

Bring this thread back to life , I also had this same issue and reached into the light and right away felt the pin that had backed up away from the projectors and pushed them back in and it worked . Thanks OP

DadCar

glad i could help!

tadaspadas

Do I understand correctly that pin has to go in to the projector?

DadCar

there is already a pin inside there, it just pops up sometimes so you need to reach in and push it down

tadaspadas

Thank you. I was easier than I thought

MBislyf

Can you point out the pin exactly from the video? Maybe a screenshot and mark it with a circle? I’ve been strugling alot and would aprecciate some help. Ty in advance

ps. Removing the bulb gives me anxiety 🤣🤣