Emkovich

Hello all. 👋🏻
I want to modefied oil cooling on my C63 performance pack. I know there was a 44O kit. But it is not available now. that's why i need to go with the Black Series parts. Tell me what items I need to order for this to work. Just need a center radiator or a side radiator too? Help please 🙏🏻

Jasonoff

Just buy this kit. https://mbworld.org/forums/c63-amg-w...4o-option.html

DRBC43AMG

I have it and can vouch that it does its job just as good or even better than the BS option. Just go for it.

go team

H


Here’s screenshots of part numbers. I have the 44O kit and it’s a complete kit with pieces that channel air a lot better and hardware. My temps on a development car have been enhanced and on manual mode with the MCT, you can very well hold a gear at the higher rpms for as long as you want. Just make sure you’re on top of the trans maintenance. It is definitely not a cheap mod to go this route the other version may work just as good but can’t speak to it.

here’s a link to the install PDF

Jasonoff

Wonder if I can make the wheel arch cooler fit on my PFL.

go team

The bracket that holds the larger side mount cooler is completely different. IIRC it was a two or three piece bracket and the oil cooler line supply and return needed to be changed. Part numbers are in the document. The side mount cooler alone is a beefy upgrade. You will need to modify the return cooler line because in the kit it attaches to the new repositioned horizontal cooler.

Alex-r-1

Welcomes everyone. Back to the cooling issue for c63. Has anyone installed radiators and oil hoses from the Black Series version? (not 440 package)
Can I fit Black Series parts into a standard C63 bumper? Will a side cooler with BS brackets fit into the fender of a regular C63? I am going to buy coolers, brackets and oil hoses from BS. Can I install them?

440 costs much more than all BS parts and they're hard to find. So I want to go with all the Black Series parts. Has anyone done this?