Throttle Body Error Codes
New member here, looking for some diagnostic help.
I recently carried out the recommended preventative maintenance on my W204 C63 intake manifold, based on Tasso’s YouTube videos. The work included:
- Cleaning and painting the intake manifold to prevent corrosion
- Replacing the throttle body plate with aluminium one
- Replacing the PCV
- Installing an oil catch can
- Installing new fuel injectors
I ran a diagnostic scan using Xentry and received the fault codes shown in the attached PDF.
I did spray the throttle body mouth and flaps with brake cleaner to remove carbon buildup, but I don’t believe this would have damaged anything.
Before I remove and open the intake manifold again (which I’m really not looking forward to), I’d appreciate everyone’s thoughts or suggestions.
Thanks in advance.




I did push the butterfly open, and I even took a picture of me doing so.....arghhhh!!!
I guess I need to open up intake manifold again. On one of Tasso's Youtube videos I saw him connect only the throttles to the car and test them by pushing the accelerator pedal and watching the butterflies move. I assume he did this using Xentry, has anyone done this before?
I did check the tb plugs to the harness to ensure they are fully seated. I can also confirm that they are brittle as the clip that holds the plug to the bracket broke off!!




