KM C63s ED1 Build
#51
Yep, just checked, my bad. Not sure where I came up with 40 profiles must have been the caffeine, heroin and vodka cocktail for breakfast. Doesn't start the brain in the right way if you know what I mean... Apologies.
I wouldn't want to go any lower a profile than 35 tbh - not for some of our roads around where I live...
Based on the 20" rims and wheel specs above, I'll assume 285/35/19's is going to be no problem in the rear then. Also hoping 265/35/19s in the front will not be an issue. I'll have this all checked out though once I get the car.
@Kingmonkey - car looks awesome dude. Ring its neck!
I wouldn't want to go any lower a profile than 35 tbh - not for some of our roads around where I live...
Based on the 20" rims and wheel specs above, I'll assume 285/35/19's is going to be no problem in the rear then. Also hoping 265/35/19s in the front will not be an issue. I'll have this all checked out though once I get the car.
@Kingmonkey - car looks awesome dude. Ring its neck!
#54
Senior Member
#56
#59
Member
Thread Starter
Join Date: Jun 2012
Location: SOCAL
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
C63S ED1
I changed the color to Gunmetal with red inners the car goes to sema Nutek wants to make a statement with the wheel sizes ,trying to get ADV1 ,Nutek was originally started from the owner of HRE .Nutek machines its own wheels like HRE so they have a fast turn around versus waiting 4-5 months for ADV1 who subs there rims out they have done my other cars with the wow factor!!
#61
MBWorld Fanatic!
Yes, aftermarket wheels are covered you would just have to pay the normal deductible. However, if you have suspension damaged caused by the wheels, MB will void the warranty.
#62
people were worried about rubbing with 285.. lol
not sure how these 305s are going to fit without hitting anything at all..
im guessing you wont lower and are you running different offset?
not sure how these 305s are going to fit without hitting anything at all..
im guessing you wont lower and are you running different offset?
#63
MBWorld Fanatic!
Looking on the tire rack site the 305/25/20 are actually 0.3" smaller diameter than the stock tire so it should not be a problem there and if they can get a offset to clear the extra width it might work.
#65
MBWorld Fanatic!
#66
#69
Member
Thread Starter
Join Date: Jun 2012
Location: SOCAL
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
C63S ED1
#70
Member
Thread Starter
Join Date: Jun 2012
Location: SOCAL
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
C63S ED1
#71
Wheel needs to be 10" wide for 285"s. Scroll down on specs
http://www.tirerack.com/tires/tires....n&autoModClar=
http://www.tirerack.com/tires/tires....n&autoModClar=
#72
The 25's are only 2 pounds heavier a piece. Curious to hear how much the Nuteks weigh. You want the tire/wheel combo to weigh as lil as possible otherwise it will slow the car down.
#73
Member
Thread Starter
Join Date: Jun 2012
Location: SOCAL
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
C63S ED1
I will get the rim weight it's a forged 3 piece rim I'm sure it will weigh in a tad more I'm thinking the look will make the weight go away LOL
#74