Window tint percentage
#1
Junior Member
Thread Starter
Window tint percentage
What are most people doing for window tint? I mean ceramic or standard and what percentage. Im thinking 35 up front and 20 in the rear and back window. I dont have much experience with the ceramic tinting but heard its nice. Im getting it done on tuesday. I had a car back in the day that was limo all around and I had to roll down the drivers window to turn left to see the median. Little too dark
#2
Junior Member
I like having matching tint all around. Blends with the car and looks alot better imo. I'm having mine tinted next week and I'm doing 30 all around with no windshield strip.
#7
Junior Member
Thread Starter
beautiful ride, love the wheels. I like the look of 30 percent all around. Im going in this afternoon to get it done. I post some pics afterwards. Any problems with visibility with that dark of tint up front when turning?
Trending Topics
#8
Junior Member
Thread Starter
What are most people doing for window tint? I mean ceramic or standard and what percentage. Im thinking 35 up front and 20 in the rear and back window. I dont have much experience with the ceramic tinting but heard its nice. Im getting it done on tuesday. I had a car back in the day that was limo all around and I had to roll down the drivers window to turn left to see the median. Little too dark
#9
Junior Member
Thread Starter
#12
Junior Member
Thread Starter
Looks great. Black cars look so classy. I love the wheels. I wished my car had those wheels vs the 5 spokes. I've been looking for some aftermarket wheels or some replicas of those titanium wheels.
#13
Junior Member
Thanks!! Yea I like the wheels alot too. I think they are very similar to the CCW sp 18 or 20. I've been thinking of doing those wheels on my cts-v
#19
Junior Member
I used spectra photosync all around and it works amazing! I got 35% on the side windows and the clear film on the front. I live in Houston where it is a good 110 degrees every damn day, and this tint makes the heat a nonfactor now. If any of yall are in houston, check out EVS Motors, they did my tint
#20
For those with front windshield tints, do you guys mount any dash cams, radar dectectors, EZpass, etc. on it?
I want to mount a sticky pad Blackvue but I'm worried about removal later on.
I want to mount a sticky pad Blackvue but I'm worried about removal later on.
#22
Junior Member
I think that sorta depends on film you have on the front windshield. Cheap films I've seen will get the top layer STRIPPED just by having something as weak as scotch shipping tape laying on top of it. Thicker/higher quality films should be fine as long as there's some care put into it. I have a blackvue on my front windshield and an EZ tag, I don't have any issues.
If you're really worried, I'm sure they can do a cut out for the stickers/blackvue base.
If you're really worried, I'm sure they can do a cut out for the stickers/blackvue base.
#23
Junior Member
#25
MBWorld Fanatic!
I did 30% all around and I thought it was definitely too light, so I got it redone in 20% all around and it's perfect. I'm not even talking about gangster limo tint look, just a decent amount of tint and it took 20% to look good.