When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
For those interested. The part # for the 2017 Edition 1 C63S Coupe front splitter is A205 800 3204. Placed an order today, was $760 cdn + taxes .. There were 2 in stock in Canada's parts warehouse in Toronto; be 3-6 days to Vancouver.
For those interested. The part # for the 2017 Edition 1 C63S Coupe front splitter is A205 800 3204. Placed an order today, was $760 cdn + taxes .. There were 2 in stock in Canada's parts warehouse in Toronto; be 3-6 days to Vancouver.
For those interested. The part # for the 2017 Edition 1 C63S Coupe front splitter is A205 800 3204. Placed an order today, was $760 cdn + taxes .. There were 2 in stock in Canada's parts warehouse in Toronto; be 3-6 days to Vancouver.
Good for you - it will look nice!
Did you ever find anything out re those rear side fins/flicks? Can't recall if they were a priority for you. I'm just starting to poke around now..
Did you ever find anything out re those rear side fins/flicks? Can't recall if they were a priority for you. I'm just starting to poke around now..
Thanks Vagabondo! I have not looked into the flicks as of yet; not something that is on my list as of now.... just the front splitter, and the ppf/tint etc. I did order the new Black Hood Badge, hopefully that is here before the car lands. Not long now!
Thanks Vagabondo! I have not looked into the flicks as of yet; not something that is on my list as of now.... just the front splitter, and the ppf/tint etc. I did order the new Black Hood Badge, hopefully that is here before the car lands. Not long now!
Re that black hood badge - did you order the eBay one from the "black hood badge" thread? I think it would look good on silver so I'm going to go for it.
Don't call me a wimp but I must say I have a fear of scratching the paint replacing it though. LOL
Who does everyone use in the USA as their favorite MB parts supplier? I did a search for "A205 800 3204" and it confuses the Internet.
I'm looking to get an idea of what this plus the Edition one rear diffuser would cost. Thanks!
I ordered the ED front splitter through my MB dealership parts centre .. simply give them the part number. Took approx a week to bring in from Germany ( I am in Canada ), and cost approx $800 cdn. My MB collision centre installed the front splitter free of charge; they inspected an actual ED1 C63S that one of the collision centre employees owned to make sure Install was exact to the factory installation. You can order the ED 1 rear diffuser this way as well, although not sure of the cost.
OP, did you have to drill holes on the side front bumper to attach side part of the splitter? I picked up one yesterday and there are 3 small screw area to screw into side bumper.
OP, did you have to drill holes on the side front bumper to attach side part of the splitter? I picked up one yesterday and there are 3 small screw area to screw into side bumper.
did u purchase the factory ED 1 front splitter? ... my MB collision centre did the install while I watched; they pre aligned the entire splitter using masking tape to hold it... they then markers and pre drilled the holes undernieth the bottom of the front bumper .. they then re affixed the splitter, aligned with the holes, and attached with 2 sided 3m tape, then used the proper screws ( same as used in the ED 1 C63S Splitter ) to fasten down. I believe there was 2 small screw holes on each end of the front splitter end pieces, and MB used two sided tape only .. you do not want to drill holes there. It's been a few months and the splitter is firmly attached; I have no worries. The collision centre did have an ED 1 on hand to use as a template and for proper factory Install.
came in factory black, flexible plastic in 3pcs. paid $711.00
by the way if anyone is interested in the black hood emblem check with House of Import in Buena park,CA they have them I got one yesterday same day I called. as for the splitter I got the last one in U.S..
also if anyone is installing splitter at home do not use too much 3M double sided tape you will have gap between bumper and splitter... I had to learn the hard way! I had to remove and re-install using small amount of 3M.
also if anyone is installing splitter at home do not use too much 3M double sided tape you will have gap between bumper and splitter... I had to learn the hard way! I had to remove and re-install using small amount of 3M.
My MB collision centre had the exact depth/size of 3M tape that fit in the groove of the splitter. It was really thin.
also if anyone is installing splitter at home do not use too much 3M double sided tape you will have gap between bumper and splitter... I had to learn the hard way! I had to remove and re-install using small amount of 3M.
And good on you for doing it yourself! I didn't have the ***** to drill into my bumper as I have the Magno paint and just didn't know what to expect... btw for others, my MB didn't charge me for the install, took them approx 45 min and took minimal parts.
my dealer couldn't do it.. and send me to another body place but they were going to charge me $520 ! anyhow my install was not perfect like yours but I can live with it LOL!
BTW love Magno paint !! beautiful color ! take care of her
my dealer couldn't do it.. and send me to another body place but they were going to charge me $520 ! anyhow my install was not perfect like yours but I can live with it LOL!
BTW love Magno paint !! beautiful color ! take care of her
did you drill the holes also and if so what screws did you use to attach it with? I should be getting mine in soon and would like to pre order everything.
I used 3/4 tapping screw once I lined up the parts. once all the pieces were in place lined up I took all the screws back out and used the bumper tabs to secure to bumper. for the side just use 3M double sided tape. drove 100+ going to Vegas over the weekend and all the pieces held up fine no missing tabs all 3M held up as well.
I used 3/4 tapping screw once I lined up the parts. once all the pieces were in place lined up I took all the screws back out and used the bumper tabs to secure to bumper. for the side just use 3M double sided tape. drove 100+ going to Vegas over the weekend and all the pieces held up fine no missing tabs all 3M held up as well.
So just that I am clear you bought a genuine MB part splitter and it came with no 3M tape already applied or screws fro mounting? That's strange cause when i bought the rear trunk lid edition 1 spoiler it had the tape already applied.
03-07-2017, 07:18 PM
