New Wheels going on next week 305's on a Sedan!!!!
#1
Member
Thread Starter
New Wheels going on next week 305's on a Sedan!!!!
Hey Guys,
Next week on Tuesday I will finally be getting my Wheels and Tires put on my car. I got some HRE R101's from David with Wheels Boutique. I must say he hooked it up!!! Great guy and amazing customer service coming from him and the guys at Wheels Boutique!! I would recommend them. He helped me with the entire process. So lets get to the wheel specs I will be putting 19x9.5 w/265/35/19 on the front and 19x10.5 w/a fat 305/30/19 on the rear. Tires of course will be Michelin Pilot Sport 4S. Check out how meaty these tires are, can't wait to get them on the car as well as doing the K-Mac camber kit on front and rear.
Next week on Tuesday I will finally be getting my Wheels and Tires put on my car. I got some HRE R101's from David with Wheels Boutique. I must say he hooked it up!!! Great guy and amazing customer service coming from him and the guys at Wheels Boutique!! I would recommend them. He helped me with the entire process. So lets get to the wheel specs I will be putting 19x9.5 w/265/35/19 on the front and 19x10.5 w/a fat 305/30/19 on the rear. Tires of course will be Michelin Pilot Sport 4S. Check out how meaty these tires are, can't wait to get them on the car as well as doing the K-Mac camber kit on front and rear.
Trending Topics
#9
Member
Thread Starter
#11
#13
Definitely subbed
Threw some 295/30s on my sedan today on the stock wheels, no camber kit or spacer and its super duper close to the inner body of the car. I'd imagine with some +53-55 offset it could work..... Maybe a little bit of camber.
Let me know how it goes! Planning on building a custom set of BBS' and need all the info I can get
Threw some 295/30s on my sedan today on the stock wheels, no camber kit or spacer and its super duper close to the inner body of the car. I'd imagine with some +53-55 offset it could work..... Maybe a little bit of camber.
Let me know how it goes! Planning on building a custom set of BBS' and need all the info I can get
#14
Member
Definitely subbed
Threw some 295/30s on my sedan today on the stock wheels, no camber kit or spacer and its super duper close to the inner body of the car. I'd imagine with some +53-55 offset it could work..... Maybe a little bit of camber.
Let me know how it goes! Planning on building a custom set of BBS' and need all the info I can get
Threw some 295/30s on my sedan today on the stock wheels, no camber kit or spacer and its super duper close to the inner body of the car. I'd imagine with some +53-55 offset it could work..... Maybe a little bit of camber.
Let me know how it goes! Planning on building a custom set of BBS' and need all the info I can get
#15
Super Member
I threw on some 295/30’s on my 10 +50...even with around -2 camber it rubbed pretty bad on fender edge. Maybe at stock height it would of worked, but lowered it didn’t.
#16
Member
Thread Starter
Definitely subbed
Threw some 295/30s on my sedan today on the stock wheels, no camber kit or spacer and its super duper close to the inner body of the car. I'd imagine with some +53-55 offset it could work..... Maybe a little bit of camber.
Let me know how it goes! Planning on building a custom set of BBS' and need all the info I can get
Threw some 295/30s on my sedan today on the stock wheels, no camber kit or spacer and its super duper close to the inner body of the car. I'd imagine with some +53-55 offset it could work..... Maybe a little bit of camber.
Let me know how it goes! Planning on building a custom set of BBS' and need all the info I can get
#18
Member
Thread Starter
Everyone look forward to tomorrow's pictures. Everything is getting installed and the Wheels weigh in at 18lbs for the Fronts and 21lbs for the Rears.
#19
Senior Member
#20
I looked into BBS wheels and at least the wheels I wanted to get custom from them, they said no and wouldn't do it unless they made multiple wheels of it to test out. They don't one off custom wheels based on the guy I spoke with. But the HRE R101 wheels are lighter than BBS light weight version of it.
Custom built wheels, not off the shelf 😜
#21
Member
Thread Starter
Hey Guys, sorry it took a little while car had a few issues getting the camber bushing in the car. But my shop is amazing. Haven’t taken any really good pictures yet and I will this weekend. But here is a little teaser of the car after I got it cleaned and filling up at the water hole.
#25
SPONSOR
Join Date: Jan 2005
Location: MIAMI, FL
Posts: 2,395
Received 241 Likes
on
188 Posts
www.wheelsboutique.com
Hey Guys, sorry it took a little while car had a few issues getting the camber bushing in the car. But my shop is amazing. Haven’t taken any really good pictures yet and I will this weekend. But here is a little teaser of the car after I got it cleaned and filling up at the water hole.
My man the car looks PHENOMENAL. So happy to have been able to work with you and earn your business. Please email me these photos ASAP!