Today's project
07-26-2018 | 12:59 AM
#1
Thread Starter
Senior Member
Joined: Oct 2013
Posts: 418
Likes: 89
From: Edmonton AB
2015 C63S ,DME Tune, KW Has ,Kmac Bushings,BC Forged wheels,Gt Rotors,Porterfield R4S,Modal Intake
Today's project
Before
After
Upgraded my brakes using the 2 piece GT rotors and Porterfield R4S pads all the way around . After a quick break in they feel pretty good and no where near the dust the OE pads throw
Last edited by C3504matic; 07-26-2018 at 01:11 AM.
07-26-2018 | 09:10 PM
#3
MBWorld Fanatic!
Joined: Sep 2015
Posts: 2,131
Likes: 258
From: Sydney
AMG C63s
No more rusted hubs.. that's the best.
Did you get these? https://www.fcpeuro.com/products/mer...mbo-2304211212
I'm also considering changing to these once mine wear out.
Did you get these? https://www.fcpeuro.com/products/mer...mbo-2304211212
I'm also considering changing to these once mine wear out.
07-26-2018 | 10:12 PM
#5
Thread Starter
Senior Member
Joined: Oct 2013
Posts: 418
Likes: 89
From: Edmonton AB
2015 C63S ,DME Tune, KW Has ,Kmac Bushings,BC Forged wheels,Gt Rotors,Porterfield R4S,Modal Intake
Yes I got them from FCP Euro but they are the exact same rotor found on the GT . I think they look better and I haven't noticed any real difference in feel and anything I do feel would be related to the pads more than the rotors . I got tired of looking at the rusty front rotors and these were a way better deal. Mine weren't even worn out but I wanted less brake dust so I changed all the rotors & pads
Last edited by C3504matic; 07-26-2018 at 10:49 PM.
07-27-2018 | 11:46 PM
#6
Thread Starter
Senior Member
Joined: Oct 2013
Posts: 418
Likes: 89
From: Edmonton AB
2015 C63S ,DME Tune, KW Has ,Kmac Bushings,BC Forged wheels,Gt Rotors,Porterfield R4S,Modal Intake
The factory S rotors are 1 piece solid ...not "floating" as mentioned. The GT rotors ,such as the type I installed from FCP Euro, are floating 2 piece rotors .....
Trending Topics
07-29-2018 | 09:57 PM
#8
Thread Starter
Senior Member
Joined: Oct 2013
Posts: 418
Likes: 89
From: Edmonton AB
2015 C63S ,DME Tune, KW Has ,Kmac Bushings,BC Forged wheels,Gt Rotors,Porterfield R4S,Modal Intake
I just went with the stock rotors and Porterfield R4S pads , there really isn't a rotor upgrade for the rear unless you go with a complete aftermarket kit inc calipers
09-21-2018 | 07:39 PM
#10
Super Member
Joined: Mar 2016
Posts: 908
Likes: 118
C63S
Did you happen to weigh both rotors before fitting?
I think I’ll be up for rotors soon.
09-29-2018 | 10:48 PM
#11
Thread Starter
Senior Member
Joined: Oct 2013
Posts: 418
Likes: 89
From: Edmonton AB
2015 C63S ,DME Tune, KW Has ,Kmac Bushings,BC Forged wheels,Gt Rotors,Porterfield R4S,Modal Intake
Sorry ...I was away so wasn't able to answer . The GT rotors are definitely lighter and the size is the same as stock
