Cylinder msifire CEL :(
Ran my OBD2 scanner and observed three codes, two seem to be related to misfire and not sure of the third. Seems identical to the misfire issues reported https://mbworld.org/forums/c63-c63s-...s-coupe-7.html.
P0300, P0301 and C0703
They followed mostly standard procedures for the most part and diagnosed it to two of the ignition coils being faulty. I encountered the misfire when I started the car in my garage and same was their observation as well. They observed it on two of the cylinders during their tests and also observed that there was no misfire once the engine was running. The tech was friendly enough to order a new ignition coil pack for four of the eight cylinders. They are on backorder and will take few weeks to arrive. They said that the car should be meanwhile safe to drive but it is expected that I will see CELs until they replace the coils. They gave me the option to either leave the car with them until they get it fixed or pick it up and bring it back again when they have the coils available. I did the latter since I didn't want to leave the car with them for that long.
As for the parking sensor issues, they did some recoding but it started failing when I was trying to leave the dealership. I informed the tech about this and they said they can order new sensors and get them replaced when they do the coils.
I have had no issues driving the car, and even yesterday I was pushing it on the freeway ramps. Let's see how it goes.




They are still replacing the coils, it's already been ordered by the SA. Let's see how that goes.
I gave up taking the car back to dealer and try to enjoy it until I return the car for good. Apparently 180 days in dealership wasn’t enough. Super disappointed here!!!!


