C63s- THE BUILD
#1
C63s- THE BUILD
Hello All .
Hope everyone is good . Long term mercedes previous owner to - a45 yellow night edition , gla (standard) , a class (standard) and now.... GLC43 and C63s 2017.
To start I got my c63 last month and within 28 days I have had to back the car to Mercedes as I have had to take it in 3 times.... now as a result I got all my money back and now have a C63s .
I pick the below car up tomorrow a c63s !
So I am used to car builds and I strongly believe in keeping the car looking as standard as possible but I am looking for everyone's advice as I progress through this build on cosmetics so please feel free to post away on what I should do with this project. The aim is to get this car big turbo and 1000bhp
I have already made two purchases ... the first one is due to the car not having the performance exhaust option so i have purchased the AWE track edition cat back to start
https://youtu.be/QH0_clZNRZo
Video above but no justice on real life I'm sure !
The second upgrade is the intake system . I have decided to get the Zac Motorsport intake! Picture and video below
https://youtu.be/cPrXgDjwgVY
Next for me is downpipe and looks for the car .... I'm leaving this down to you guys on guidance !
I hope you've enjoyed the first part and look forward to input from you all
Alex
Hope everyone is good . Long term mercedes previous owner to - a45 yellow night edition , gla (standard) , a class (standard) and now.... GLC43 and C63s 2017.
To start I got my c63 last month and within 28 days I have had to back the car to Mercedes as I have had to take it in 3 times.... now as a result I got all my money back and now have a C63s .
I pick the below car up tomorrow a c63s !
So I am used to car builds and I strongly believe in keeping the car looking as standard as possible but I am looking for everyone's advice as I progress through this build on cosmetics so please feel free to post away on what I should do with this project. The aim is to get this car big turbo and 1000bhp
I have already made two purchases ... the first one is due to the car not having the performance exhaust option so i have purchased the AWE track edition cat back to start
https://youtu.be/QH0_clZNRZo
Video above but no justice on real life I'm sure !
The second upgrade is the intake system . I have decided to get the Zac Motorsport intake! Picture and video below
https://youtu.be/cPrXgDjwgVY
Next for me is downpipe and looks for the car .... I'm leaving this down to you guys on guidance !
I hope you've enjoyed the first part and look forward to input from you all
Alex
Last edited by Ajkwilson; 02-20-2020 at 04:00 PM.
The following users liked this post:
ansonkk1 (02-21-2020)
The following users liked this post:
ansonkk1 (02-21-2020)
#4
Senior Member
Joined: Jun 2019
Posts: 272
Likes: 72
From: Los Angeles, CA
2019 C63S Coupe, 2020 G550
#6
We have downpipes in stock and ready to ship at a great price, both catless and catted. All of our downpipes come with integrated heat shields and 3" inner diameter.
https://modal.works/shop/c63-performance-downpipes
Feel free to reach out directly with any more questions!
https://modal.works/shop/c63-performance-downpipes
Feel free to reach out directly with any more questions!
The following users liked this post:
Ajkwilson (02-21-2020)
#10
#11
car looks real nice in that colour. never seen that before on road here. my goal is 700hp not 1k lol
so far i've got the renntech exhaust valve module (so flaps open 100% all the time)
renntech ecu tune with burble
downpipes
BOV
just air intake filter upgraded.
(actually installing most of these shortly.. )
i hope i'll get 650-700 then ill think about something else down the line. Car at stock did 575hp and 590 tq. (only secondary cats were gone)
Looking forward to seeing what else you have in line to make this one closer to 1k.
so far i've got the renntech exhaust valve module (so flaps open 100% all the time)
renntech ecu tune with burble
downpipes
BOV
just air intake filter upgraded.
(actually installing most of these shortly.. )
i hope i'll get 650-700 then ill think about something else down the line. Car at stock did 575hp and 590 tq. (only secondary cats were gone)
Looking forward to seeing what else you have in line to make this one closer to 1k.
#12
I have a 2017 Designo Diamond White C63 S AMG with the night package. It looks pretty good stock, but I want to make it more aggressive, especially the rear end. Will follow this thread closely to get some ideas.
The following users liked this post:
Ajkwilson (02-23-2020)
#13
car looks real nice in that colour. never seen that before on road here. my goal is 700hp not 1k lol
so far i've got the renntech exhaust valve module (so flaps open 100% all the time)
renntech ecu tune with burble
downpipes
BOV
just air intake filter upgraded.
(actually installing most of these shortly.. )
i hope i'll get 650-700 then ill think about something else down the line. Car at stock did 575hp and 590 tq. (only secondary cats were gone)
Looking forward to seeing what else you have in line to make this one closer to 1k.
so far i've got the renntech exhaust valve module (so flaps open 100% all the time)
renntech ecu tune with burble
downpipes
BOV
just air intake filter upgraded.
(actually installing most of these shortly.. )
i hope i'll get 650-700 then ill think about something else down the line. Car at stock did 575hp and 590 tq. (only secondary cats were gone)
Looking forward to seeing what else you have in line to make this one closer to 1k.
Which downpipes did you go for this is something I'm researching at the moment?
After my bits are added I'll be getting some cosmetics done being carbon exterior , spacers and springs which I'm currently organising. Next will be downpipes snd then I'll be looking at big turbo and strengthening internals .
I've annoying managed to get a kerb mark half a inch wide on the rim of allow yesterday ... luckily have insurance so that is to be sorted tomorrow
#14
Appreciated . I will put as much detail as I can along the way . I am very fussy about parts I fit and only do based on true reliability so I hope I can help
#15
car looks real nice in that colour. never seen that before on road here. my goal is 700hp not 1k lol
so far i've got the renntech exhaust valve module (so flaps open 100% all the time)
renntech ecu tune with burble
downpipes
BOV
just air intake filter upgraded.
(actually installing most of these shortly.. )
i hope i'll get 650-700 then ill think about something else down the line. Car at stock did 575hp and 590 tq. (only secondary cats were gone)
Looking forward to seeing what else you have in line to make this one closer to 1k.
so far i've got the renntech exhaust valve module (so flaps open 100% all the time)
renntech ecu tune with burble
downpipes
BOV
just air intake filter upgraded.
(actually installing most of these shortly.. )
i hope i'll get 650-700 then ill think about something else down the line. Car at stock did 575hp and 590 tq. (only secondary cats were gone)
Looking forward to seeing what else you have in line to make this one closer to 1k.
The following 2 users liked this post by esworld05:
Ajkwilson (02-24-2020),
ModalWorks (02-26-2020)
#16
No need for apology would be good to hear this also ! I'm always open to hear first hand experiences and see honest views on aftermarket parts
#17
Car went in for a dyno today to see what is was running stock .... VERY happy with the result . 533BHP & 812NM
A nice healthy engine for whats to come. Next will be exhaust and intake and another run so will be good to see the difference !
A nice healthy engine for whats to come. Next will be exhaust and intake and another run so will be good to see the difference !
The following users liked this post:
Ajkwilson (02-29-2020)
#19
Another purchase today! Think this will really need the temps down! .
I have the exhaust , intake and exchanger all waiting to arrive and fit ... this is looking around end of march / beginning april atm.
Going to dyno again once parts are fitted to see how it differs.... taking note, the car has had no tuning but am still hoping for some small gains.
Trying to decide what I'm going with next while I wait .... Toying with KW Springs or black out the grill / add pan grill in black with black badges ... or both !?
do I need to lower a car that's already very low ?
Thoughts are welcome !
I have the exhaust , intake and exchanger all waiting to arrive and fit ... this is looking around end of march / beginning april atm.
Going to dyno again once parts are fitted to see how it differs.... taking note, the car has had no tuning but am still hoping for some small gains.
Trying to decide what I'm going with next while I wait .... Toying with KW Springs or black out the grill / add pan grill in black with black badges ... or both !?
do I need to lower a car that's already very low ?
Thoughts are welcome !
#20
Keeping myself busy with ideas and I have a couple calls tomorrow with fabrication companies to get the secondary cats cut out and pipe welded back in ... easy mod and will make the car come alive for when the AWE track arrives
Will dyno the car for each mod fitted as and when they arrive (and fitted) to see how it differs from my first. Be interesting to see if it improves with one change or multiple combined .
Will dyno the car for each mod fitted as and when they arrive (and fitted) to see how it differs from my first. Be interesting to see if it improves with one change or multiple combined .
#21
That's what I was thinking of doing. Getting my secondary cat's deleted but if I'm already going to hack then up, might as well install some downpipes for some gains and a bad *** sound lol. I dont have the PE exhaust so I'll see where that puts me sound wise
#22
Another purchase today! Think this will really need the temps down! .
I have the exhaust , intake and exchanger all waiting to arrive and fit ... this is looking around end of march / beginning april atm.
Going to dyno again once parts are fitted to see how it differs.... taking note, the car has had no tuning but am still hoping for some small gains.
Trying to decide what I'm going with next while I wait .... Toying with KW Springs or black out the grill / add pan grill in black with black badges ... or both !?
do I need to lower a car that's already very low ?
Thoughts are welcome !
I have the exhaust , intake and exchanger all waiting to arrive and fit ... this is looking around end of march / beginning april atm.
Going to dyno again once parts are fitted to see how it differs.... taking note, the car has had no tuning but am still hoping for some small gains.
Trying to decide what I'm going with next while I wait .... Toying with KW Springs or black out the grill / add pan grill in black with black badges ... or both !?
do I need to lower a car that's already very low ?
Thoughts are welcome !
Personally, I think you should lower it a bit and throw some spacers on. A black pan grill with chrome star would look really good IMO . I don't think blacking out the emblems would work well for your color combo, the chrome emblems match your wheels better.
Last edited by deftronix; 03-01-2020 at 06:00 PM. Reason: Added suggestions.
#23
Spoke to a company near me today who has done plenty of secondary cat delete - £300 all in to cut out and replace pipe . Personally I think it's well worth it . 3 hour job and still keeps the car mot worthy over here without any fault codes . Worse case scenario they can be welded back in ! Lol . The secondary delete with the awe track and its enough sound for me
#24
Love the color combo, very nice! What made you go CSF? Like the fact it has a lower guard for those running the facelift lower grills and the price. Am on the brink of ordering the wagner tuning kit because it comes with the side core as well but is pricey. Look forward to seeing what the CSF does for temps..
Personally, I think you should lower it a bit and throw some spacers on. A black pan grill with chrome star would look really good IMO . I don't think blacking out the emblems would work well for your color combo, the chrome emblems match your wheels better.
Personally, I think you should lower it a bit and throw some spacers on. A black pan grill with chrome star would look really good IMO . I don't think blacking out the emblems would work well for your color combo, the chrome emblems match your wheels better.
so in order I've decided to do next....
Secondary cat delete , KW springs , spacers, pan grill and chrome star
Should keep me busy for a while and I'll be back for more ideas !
#25
Small update for you all . The AWE track exhaust was fitted along with the CFS heat exchanger yesterday. Some pictures below
THE EXHAUST SOUNDS AMAZING ! its a complete step up from a non pf ! I haven't ran the car to see figures on the csf but it was a really well crafted piece of equipment and ill return with logs once the intake is fitted .
Car is booked in this Saturday for secondary cat detele ... that's me done for the exhaust for now....
next up will be...
Secondary cat delete
Intake install
dyno and logs
springs
Cosmetics
Over and out
THE EXHAUST SOUNDS AMAZING ! its a complete step up from a non pf ! I haven't ran the car to see figures on the csf but it was a really well crafted piece of equipment and ill return with logs once the intake is fitted .
Car is booked in this Saturday for secondary cat detele ... that's me done for the exhaust for now....
next up will be...
Secondary cat delete
Intake install
dyno and logs
springs
Cosmetics
Over and out