W205 C63 C63S Heat Exchanger sets! Maximize cooling!
Thread Starter
SPONSOR
Joined: Jul 2016
Posts: 3,024
Likes: 395
From: Colorado, USA
E55 C63
MBWorld Fanatic!
Joined: Aug 2012
Posts: 1,218
Likes: 315
From: Pearland, Tx
2020 AMG GTC Coupe & 2018 Macan Turbo
You posted this on 1/11:
As mentioned previously we do have them on our shop car. We are going to go back and get run data, but we have alot of other 177 products to knock out. Our units are much larger volume than the factory units, The front unit has approximately 75% increase in volume over the stock Unit, and the side units have approximately 80% increase in volume. Surface area is almost the same, you will also see an increase in flow rate for the intercooler circuit as these are less restrictive on the liquid side. This will result in improved cooling efficiency.
I notice you keep pushing your products and yet... Where's the data?
As mentioned previously we do have them on our shop car. We are going to go back and get run data, but we have alot of other 177 products to knock out. Our units are much larger volume than the factory units, The front unit has approximately 75% increase in volume over the stock Unit, and the side units have approximately 80% increase in volume. Surface area is almost the same, you will also see an increase in flow rate for the intercooler circuit as these are less restrictive on the liquid side. This will result in improved cooling efficiency.
I notice you keep pushing your products and yet... Where's the data?
Thread Starter
SPONSOR
Joined: Jul 2016
Posts: 3,024
Likes: 395
From: Colorado, USA
E55 C63
You posted this on 1/11:
As mentioned previously we do have them on our shop car. We are going to go back and get run data, but we have alot of other 177 products to knock out. Our units are much larger volume than the factory units, The front unit has approximately 75% increase in volume over the stock Unit, and the side units have approximately 80% increase in volume. Surface area is almost the same, you will also see an increase in flow rate for the intercooler circuit as these are less restrictive on the liquid side. This will result in improved cooling efficiency.
I notice you keep pushing your products and yet... Where's the data?
As mentioned previously we do have them on our shop car. We are going to go back and get run data, but we have alot of other 177 products to knock out. Our units are much larger volume than the factory units, The front unit has approximately 75% increase in volume over the stock Unit, and the side units have approximately 80% increase in volume. Surface area is almost the same, you will also see an increase in flow rate for the intercooler circuit as these are less restrictive on the liquid side. This will result in improved cooling efficiency.
I notice you keep pushing your products and yet... Where's the data?
The car made 548/751 on 91 octane with 122 peak temps. We have a lot of other products to test, Shop car is getting VRP1000 Turbos right now. Sorry. We will not being returning the car to stock to test the stock units vs current. The dimensional differences are posted. If you don't think they work I recommend going with a CSF unit instead. https://www.vrpspeed.com/product/w20...eat-exchanger/
Our units are much larger volume than the factory units, The front unit has approximately 75% increase in volume over the stock Unit, and the side units have approximately 80% increase in volume. Surface area is almost the same, you will also see an increase in flow rate for the intercooler circuit as these are less restrictive on the liquid side. This will result in improved cooling efficiency.
MBWorld Fanatic!
Joined: Jun 2019
Posts: 1,453
Likes: 399
From: Flat Earth
AMG C63s Sedan , AMG C43 , AMG G63 , GLK 250
You posted this on 1/11:
As mentioned previously we do have them on our shop car. We are going to go back and get run data, but we have alot of other 177 products to knock out. Our units are much larger volume than the factory units, The front unit has approximately 75% increase in volume over the stock Unit, and the side units have approximately 80% increase in volume. Surface area is almost the same, you will also see an increase in flow rate for the intercooler circuit as these are less restrictive on the liquid side. This will result in improved cooling efficiency.
I notice you keep pushing your products and yet... Where's the data?
As mentioned previously we do have them on our shop car. We are going to go back and get run data, but we have alot of other 177 products to knock out. Our units are much larger volume than the factory units, The front unit has approximately 75% increase in volume over the stock Unit, and the side units have approximately 80% increase in volume. Surface area is almost the same, you will also see an increase in flow rate for the intercooler circuit as these are less restrictive on the liquid side. This will result in improved cooling efficiency.
I notice you keep pushing your products and yet... Where's the data?
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
MBWorld Fanatic!
Joined: Sep 2016
Posts: 1,720
Likes: 609
From: Australia
⏱️ 700HP Facelift converted C63 S Coupe with Drexler 3.06 plated LSD
No data
Newbie
Joined: Aug 2022
Posts: 11
Likes: 1
LX
MBWorld Fanatic!
Joined: Sep 2016
Posts: 1,720
Likes: 609
From: Australia
⏱️ 700HP Facelift converted C63 S Coupe with Drexler 3.06 plated LSD
