Hi guys,
need abit of help as I am useless on this subject.
I plan on getting new set or alloys looking at the CVR3s
ive decided to stay with 19s however I’m struggling to understand the offsets regardless of how many times it’s been explained to me. (Just one of those things)
ive emailed driftworks they said et45 9j all round.
The look I’m going for is wide at the back.
and concave as much as possible.
can anyone help with fitment sizes etc or what they know fits. I’m not wanting to do any modifications to the car just a straight swap so as far as the arches would allow..
i know this subject has been raised many times but no definitive answer
Don't follow that recommendation of 9" +45 all around for the sedan is just not a good fit.
I am pretty flush and use
front: 9.5+35 paired with 265 tires
rear: 10.5+57 paired with 285 tires
I am lowered too but the fitment w/o lowering would still apply and and be a good start.
Now, due to the large positive offset our cars need paired with the limited wheel width you will not get much concavity in general. Just so you don't be disappointed.
I run 19x9.5 +35 265/35 front 19x10.5 +54 285/35 rear. Also lowered on eibachs.
Like tobeit said you won't get much concavity with the offsets on our car being high from the factory.
I run 19x9.5 +35 265/35 front 19x10.5 +54 285/35 rear. Also lowered on eibachs.
Like tobeit said you won't get much concavity with the offsets on our car being high from the factory.
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.