mycl500

Am I going to have issues with the rear 275/35-19 with an offset of 47mm? Is it going to rub the fender? Will I need to get the fender roll? You know of any place in Seattle/Tacoma that would roll the fender? Thx for any feedbacks.

I'm planning going with this setup:

19x8.5





Offset: 46mm Backspacing: 6.61" Bolt Pattern: 5-112
Rec. Tire Size: 245/40-19
Weight: 31.5lbs.
Important Notes

19x9.5





Offset: 47mm Backspacing: 7.12" Bolt Pattern: 5-112
Rec. Tire Size: 275/35-19
Weight: 32.0lbs.

slonar21

I think you will be fine, check this link for wheel fitment...

http://www.alloywheelsdirect.net/inf.../mercedes-benz

fatmike

You'll be fine

wease206

21x9 255/30R21 21x10.5 285/30R21 Brabus

would this fit

slonar21

I don't think so, with 20's the max would be 255/35/20 and 285/30/20 and brabus recomends rolling fenders with this setup. If you want 21's you will need a thiner tire like 255/30/21 and 285/25/21. The car will handle very rough, I would not go bigger than 20". You can always call up Brabus, they are always willing to help with there products.

Patentmat

Just so the record is not wrong for people searching this thread in the future, I believe the max is 305/30 on the 20s as I have not seen anything wider, and that is what I am running. Mine is the 55 so the fenders are already rolled. I completely agree with slonar21 though, on not going larger than 20s. Maybe on the new body style but not the 215.

aeggroup

You may check it on this website :

http://www.bigcustomwheels.com/info_specs.jsp

Just put your original size on a left side and optional on a right.

It will tell you result at the bottom.

GL.