2005 CL-600 Whining Noise at low RPM
-LeoD












Last edited by 2014CL600; Dec 18, 2014 at 04:34 PM.
good luck
Last edited by 2014CL600; Dec 19, 2014 at 10:57 PM.
The Best of Mercedes & AMG
. But I'll take some soon and post them. You will see why I love it so much! Thanks for your help. I'll let you know how the transmission flush works out. Take care!
What can I say? It doesn't get much better than this.
Read this post it might give you the answers you are looking for.
http://www.benzworld.org/forums/w220...iy-repair.html
Last edited by 2014CL600; Dec 23, 2014 at 09:35 PM.
This does sound like a transmission noise . Now it's possible to get a good used transmission from a car being parted out for as little as $500 and have an independent shop install it for about $300 (I did this to my s430) . If you can drive /listen to the donor car before its removed even better . When I had my used transmission put in I also inherited the noise described above as a piece of paper clicking the wheel spoke. I just live with it as I'm not a perfectionist

The service writer told me the mechanic mentioned "he knows" that the new hose when installed properly will take care of the whine even though as suggested, if the whine is there with the serpentine belt off, the hose is not pressurized.
Unless the whine is not the result of the hose being pressurized and improperly secured; but rather creating a harmonic vibration. In that case, whether the hose is pressurized or not, would not make any difference.
In fact, I have tried steering the car while stationary; fully to the right and left repeatedly and it makes no difference to the pitch or noise level. I would suppose that in steering the wheels back and forth, there would be some change if not necessarily in the pressure if properly regulated as I presume in a car like that it would be, but certainly in the volume of hydraulic fluid moving through the hose.
I think as I mentioned before, while it is extremely hard to say "my whine" is like "your whine" because after 2000 RPMs, any whine that is not outrageous, will disappear as it is drowned by the engine noise, there seems to be be so many different things that have or not have resolved "the whine" that if it turned out to be a muffler bearing--which would be fine with me if the whine went away and they didn't charge me anything to replace it--I still contend that for such a vehicle to have so many whine issues as it seems to have; and that as owners, we are at the mercy of a dealer that however well-intentioned, claims to not ever having experienced the problem before, to me is not that far fetched
Any way I look at it, there weren't zillions of V12 cars built in the 215 class, and a whine is such an open wide term that anything could be the cause. What I do feel, however, is that Daimler-Benz knows exactly what my seemingly impossible source of the whine is, but find it hard to tell someone that paid over $165,000.00 for one of their cars--that being German, they are naturally perfect--that they vehicle does have a problem with whining issues irrespective of the source. As a consequence, out op pride if nothing else, they won't even let the dealers know; so all they can tell you is that they have never seen it before. Especially in my case, where I know for a fact that in my entire county of over a million people, only three V12 W215 cars are registered.
It is like the ABC pump vibration damper kit that in the eyes of Mercedes, while they suggest you install one, they do so only because they can charge you for it when the later cars all came with them from the factory. To me, it comes down to ethics, but I guess I'm too old fashion as ethics in a word most younger generations know about because it is a required course for getting an MBA. In other words, ethics have become a business matter rather than a moral one.
Stay tuned some more...
P.S BTW, those of you that are fans of Wayne Carini's TV show Chasing Classic Cars, there is an episode where he came to Utah to look at some cars I told him about and my CL600 has had its 5 minutes of fame.

Well, I got the car back and the whine is gone. I guess at least in my case, it was the hydraulic hose and it actually burst right where it had been rubbing against what I suppose is the bell housing or somewhere nearby. That also explains why the hose failed which to me was a concern. I like to know if at all possible why something failed as it is not always as clear as wear and tear as it is with other items.
That hose is quite long and nearly runs the length of the car; so, there were plenty of places where if improperly mounted, could cause problems. Since it is impossible to see underneath the car without removing all the undercar covers, it would have been impossible for me to see any problem areas.
I do, however, wonder why that was not checked when the ABC pump that was supposed to be the problem, and it wasn't; was replaced; or the vibration damper for the pump that was missing, which also did not solve the problem.
In any case, the service manager did give my bill a haircut and I am fine because at least the problem, or should I say, the whine that my car made, is gone. Whether that would be the case in every instance of a whine, I can't say, But most definitely that is one place to look if not that obvious as a bad belt or pulley that can easily be checked with a stethoscope.
Thanks everyone!
I had the same hum/vibration issue with my CL500. I took it to my local indi to check and ended up with a new water pump, new crankshaft pulley, and belt tensioner and a BLOODY HUM/VIBRATION!! a little further internet search found the attached document. Another trip to the indi with said document, new Pulsation damper fitted and BLISS. No hum/vibration and a suspension that feels a lot tighter/firmer. Lesson-don't give anybody your car and ask them to investigate "a strange sound"
http://workshop-manuals.com/mercedes...buzzing_noise/
I would think that if you told the parts manager if is the "long high-pressure hydraulic hose that goes from the ABC pump and runs the length of the car" to feed the shocks, they can't really miss it on their parts diagram.
It is true that both cars are based on the W215 chassis, but what I don't know is maybe the hose's outlets that branch out to the different parts of the car, would be in the same place and also be the same size. It does have steel reinforced rubber sections as well as solid steel tube sections. They may also be in different places.
Most important, however, is that I've had the car looked at for nearly three years by several dealers and independent shops, and not one of them pointed to the hose as being a problem even though Mercedes had a technical bulletin on that very thing.
Remember that my hose finally wore through and strayed the hydraulic oil out before it became evident that it had been rubbing against what I was told was the "transmission area" and since it was always secure, it was impossible to see unless someone specifically was looking for that very problem.
In fact, when the mechanic told me the new hose would fix the whine, I was very skeptical by then and didn't believe it until I drove out of the dealership lot. Also, I got sticker shock when I saw they charged me nearly $1,200.00 just for the hose and a pretty chunk for freight because of the shape of the box it was in. Honestly, I was at a point where if it had not burst, I would have not replaced it no matter who told me it was the problem. Particularly when no one in the entire dealership had ever had to replace that hose but once, and that was the guy that replaced mine.
When you consider how many Mercedes models use or used that system, it just seemed too far fetched. But it fixed it...
i'll post the part number tomorrow.









