CL-Class (W215) 2000-2006: CL 500, CL 600

Level control

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 08-30-2013 | 09:16 PM
  #1  
Sevans11's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2013
Posts: 22
Likes: 0
2000 CL500
Level control

I recently( 3 months ago) replaced my ABC and power steering pump. I've now noticed that if I don't drive for a few days the car lowers on the left front and I have to use the level control switch to raise it back up. Is this the result of the pump not functioning correctly and does this lead to a bigger problem?
Thanks
Old 08-30-2013 | 09:47 PM
  #2  
calgary's Avatar
Senior Member
 
Joined: Aug 2007
Posts: 284
Likes: 26
From: Calgary Alberta Canada
2001 Mercedes CL500 2006 E350 4-matic
Leaky valve block? I have had this problem for several years now. Sometimes I have to turn the engine off for a minute or two, restart and "use the level control switch to raise it back up" (as you call it). Had the valve blocks cleaned, good for a while, then same problem again.
Old 08-30-2013 | 10:03 PM
  #3  
Sevans11's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2013
Posts: 22
Likes: 0
2000 CL500
Thanks for the reply. Did it ever stop?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Level control



All times are GMT -4. The time now is 09:02 AM.