ABC..down at one corner.
No matter what the setting the front sits low. When I press the height button it rises as the others do etc...but it is still lower than it should be.
My MB specialist had it for a day, I though to simply calibrate the system and level things up...but he says it will not level up, and therefore there must be a faulty sensor within that strut.
Does this sound plausible?
Thanks in advance...this being my first post in this sub forum.
https://mbworld.org/forums/cl-class-...abc-scare.html
You can change these yourself for $40




https://mbworld.org/forums/cl-class-...abc-scare.html
You can change these yourself for $40
The vertical acceleration sensors are not the problem here. Sounds like your tech is on the right track looking at the strut first.







