Need Stock Radio's Pin Out for Auxilary Audio & Remote 12V Signal


I have an 02 CL500 & planned on adding an external audio jack & a power sub to the stock audio system. I don't have a schematic nor the radio's connector diagram/pin out so can anyone let me know which pins can I tap from the stock radio to get the aux audio output & the remote 12V signal to turn on the sub's amp whenever the radio is on? Thanks for your help in advance.
John


The blue wire will be the remote turn on.
The speaker wires are in twisted pairs...the fifth pair will be the sub. To test this use a 1.5 volt battery to activate the speaker on/off on/off, you will hear it crackle...do not hold it on the wires.


Last edited by superfast; Dec 13, 2016 at 03:41 PM.


