Trunk and soft close works for a bit?
Thread Starter
Super Member
Joined: Sep 2019
Posts: 706
Likes: 71
CL55
Trunk and soft close works for a bit?
Hey guys my trunk does not have the power close its all done by hand but I can press the button on my key or inside the car to make it pop open. The problem is if I disconnect and reconnect the battery it will work fine for about one month then one day just wont open with the key or button inside the car, I have to start opening it with the manual key. Not sure why it does this? If I disconnect and reconnect the battery again it will work for about one month and stop. Also this happens with the soft close it will work for about 1 month then just stop until I reset the battery. Any ideas why?
Whats also strange is that my driver side soft close has a leak so it does not really work I just hear it leaking air but it still wants to work but as I said the passenger one will work perfectly fine for about one month then just wont activate unless I do the battery thing.
Whats also strange is that my driver side soft close has a leak so it does not really work I just hear it leaking air but it still wants to work but as I said the passenger one will work perfectly fine for about one month then just wont activate unless I do the battery thing.
That happens when you have a leak
the compressor shuts down the leaking part until reset so the pump doesn't burn out and the other parts get enough pressure to work
at least, if I remember well
more info here
https://w220.ee/Pneumatic_System_Equipment_(PSE)_Pump
the compressor shuts down the leaking part until reset so the pump doesn't burn out and the other parts get enough pressure to work
at least, if I remember well
more info here
https://w220.ee/Pneumatic_System_Equipment_(PSE)_Pump
Thread Starter
Super Member
Joined: Sep 2019
Posts: 706
Likes: 71
CL55
That happens when you have a leak
the compressor shuts down the leaking part until reset so the pump doesn't burn out and the other parts get enough pressure to work
at least, if I remember well
more info here
https://w220.ee/Pneumatic_System_Equipment_(PSE)_Pump
the compressor shuts down the leaking part until reset so the pump doesn't burn out and the other parts get enough pressure to work
at least, if I remember well
more info here
https://w220.ee/Pneumatic_System_Equipment_(PSE)_Pump
So the system times out the one that actually works but the one that has the leak keeps working? Thats what is going on with it maybe I made it hard to understand, The driver side which I do not use because it leaks works I can hear it but the passenger one that does not leak (works fine) does not turn on, same with the trunk.
both side now:
Video of passenger side when I reset battery:
Last edited by MartinWake; Dec 24, 2020 at 04:13 PM.
