Driveshaft U-Joint Part Number?
Thread Starter
Junior Member
Joined: Sep 2017
Posts: 39
Likes: 8
2000 CL 500
Driveshaft U-Joint Part Number?
Does anyone know the part number for the Universal Joint in the driveshaft by chance?
2000 CL500
Getting one just by size may be tricky.
Size: cap diameter : 0.945" , length = 3.5"
Thank-you.
2000 CL500
Getting one just by size may be tricky.
Size: cap diameter : 0.945" , length = 3.5"
Thank-you.
Last edited by Viper GTS; Jul 19, 2022 at 09:26 PM.
Thread Starter
Junior Member
Joined: Sep 2017
Posts: 39
Likes: 8
2000 CL 500
I did get one and replaced it. Its a metric size. If you search for a "24mm x 88mm Staked U-Joint" you will find some online. Mine is a perfect match.
If you replace yours be sure to completely remove (grind out) the old staked points in the yokes. If there's even a little bit left they can crimp the new caps upon install shrinking it and ruining the cap.
If you replace yours be sure to completely remove (grind out) the old staked points in the yokes. If there's even a little bit left they can crimp the new caps upon install shrinking it and ruining the cap.
Super Member
Joined: May 2021
Posts: 554
Likes: 150
From: Netherlands
CL 600 '00 5.8L V12
Please bookmark: https://nemigaparts.com/cat_spares/e...fg/215378/68r/
It will allow you to find all the parts of the CL. You might want to select the CL500 first ;-)
It will allow you to find all the parts of the CL. You might want to select the CL500 first ;-)
Super Member
Joined: May 2021
Posts: 554
Likes: 150
From: Netherlands
CL 600 '00 5.8L V12
That's why you can't and shouldn't replace the U-joint and or one of the shafts
