Any One Interest in Carbon Fiber Rear Spoiler for the W215?
#401
Senior Member
The parts never get more then 2 coats of clear max. If it ever fails QC it gets sanded down totally again. What you may be seeing an inherent design of a wet layup part. The resin depending on some angles can looks wavy, and this is true on a lot of factory carbon parts too if you look closely. It may be more noticeable on a spoiler since it is all totally flat, and on a front lip or diffuser it is not as noticeable due to more curves. By sanding down the clear it is possible some wavyness can be hidden. But if you do this be careful, I would not use anything less then 2000 or 1500 grit sand paper unless you really know what you are doing.
For now, I'm going to enjoy it as-is. Great work.
#402
Also, no disrespect, But everyone has different expectations. For instance, we once made a customer one off carbon air boxes. They came out incredible! looks like it was an OEM Factory part. He got it and said it was terrible. We got it back and I must say the parts are flawless, I still to this day could not figure out what was wrong with it, or find a flaw. Also, another example is some people get a diffuser and see an area of bunched weave or stretched weave on a fin and think it is unacceptable. Well these parts are hand made and there is no way around it. Each part is like a finger print, no 2 are usually alike. Although every effort is made to get these parts as best as possible in the end, sometimes a person looking for a flaw will eventually find one.
Pete
#403
Former Vendor of MBWorld
Whats funny is they would have fit your car, but the bad news is they sold a while ago to a forum member who put them on his E55 with Kleemann stuff....
#404
Senior Member
Thread Starter
Join Date: Jan 2010
Location: bay area
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
2005 cl55 eurocharged flash
hey peter, how you doing man. did you have a chance to put the spoiler on your car yet? and whats up with neal hidding all the nice stuff from us w215 owner.
#405
Former Vendor of MBWorld
It was just the stock airboxes and front engine cover in carbon... here was a pic of it on the guys car after he said it looked terrible!
#406
spoiler
Hey Neil, hey Ken, how you guys doin? sorry for no participating in the side squirt thread, i still dont have the ///AMG side squirts, stuck with these lorinser ones for now, Ken i know you probably purchased 2 of these as usual, if you can reserve one for me that would be great, if not, i understand im too late.
Last edited by N.cali CL55club; 03-07-2012 at 02:22 PM. Reason: wrong pic
#407
Senior Member
Thread Starter
Join Date: Jan 2010
Location: bay area
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
2005 cl55 eurocharged flash
Hey Neil, hey Ken, how you guys doin? sorry for no participating in the side squirt thread, i still dont have the ///AMG side squirts, stuck with these lorinser ones for now, Ken i know you probably purchased 2 of these as usual, if you can reserve one for me that would be great, if not, i understand im too late.
#408
MBWorld Fanatic!
Join Date: Feb 2010
Location: Los Angeles
Posts: 1,477
Likes: 0
Received 5 Likes
on
5 Posts
04 CL55 (sold), 2012 CLS550 (sold), 2014 S550 (sold), 2015 ES300H (DAILY)
the car looks great N.Cali!
the side skirts would definitely be a nice, final touch to the rest of the carbon parts you have
the side skirts would definitely be a nice, final touch to the rest of the carbon parts you have
#410
hey i saw on your website that this diffuser only fits the 55/65 AMG models but
i am wondering will it also fit the cl500 with the amg sport package?
@ kenph10 what rims do u have on yours im looking for something similar
i am wondering will it also fit the cl500 with the amg sport package?
@ kenph10 what rims do u have on yours im looking for something similar
#411
Senior Member
Thread Starter
Join Date: Jan 2010
Location: bay area
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
2005 cl55 eurocharged flash
[QUOTE=
@ kenph10 what rims do u have on yours im looking for something similar[/QUOTE]
mine are HRE, i forgot which model
@ kenph10 what rims do u have on yours im looking for something similar[/QUOTE]
mine are HRE, i forgot which model
#414
Junior Member
Euro Teck Carbon Products
Anyone have some good photographs of Euroteck product on CL55? I am interested in purchasing the front and rear pieces they are advertising. But the photographs on their site are dark and I like to see one on a lite color vehicle. For those who purchased their product what your impression.
#416
Senior Member
Anyone have some good photographs of Euroteck product on CL55? I am interested in purchasing the front and rear pieces they are advertising. But the photographs on their site are dark and I like to see one on a lite color vehicle. For those who purchased their product what your impression.
#417
Junior Member
Join Date: Jul 2009
Location: North Hollywood
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
2005 CL55
Rear Diffuser
hey w215 owner's, i was wondering if any member want to do a group buy for a carbon fiber rear spoiler for the w215. since neal from euroteck has done the front lip spoiler and doing the limited rear diffuser, why not ask him to do a limited carbon fiber rear spoiler for the car also. i was looking for a aggressive look like the vorsteiner c63 rear spoiler. i'm open to any spoiler also and all opinion are welcome. just wanted to get a rear spoiler to match neals other stuff. thanks
Where can i get it from?
#419
Banned
Join Date: Nov 2008
Posts: 1,357
Likes: 0
Received 3 Likes
on
3 Posts
MB; 55KCL AMG, SL550 SLS AMG G500 Cabrio 280SL ML350 CLS550 ML500 E55 AMG CL500 S600 SLK32 AMG
I will be really disappointed if these go on sale again. This was strictly a limited edition 10 member group buy. Where the hell were you guys when we needed members to finish up the list? F()ck that! I'm sure the same people are going to want a set of carbon fiber side skirts when we get them. I take pride, as I'm sure the other W215 Euroteck group buy members do, that we have ultra rare carbon fiber parts for our cars that we put our time, money and patience into to be the ones with the rare parts, not knowing when they'd be finished or what they'd look like.
Hakop, you were a member since July 2009, you could've easily been a part of the group buy when it was going on. Now that the pieces are finished and look amazing, it's easy to say, "Hey, let me get this diffuser or that spoiler." You have no R&D development time to wait for like we did. That's not fair and it's insulting. If I was Neal and/or Euroteck, and was a man of my word, I'd straight up say, "No, too bad, you missed your chance." That was one of the major selling points to me, to know only 9 other people on the planet besides myself will have this piece. Exclusivity is an amazing thing, and we paid and waited for that. Now others are trying to take that away, that's not cool. Go elsewhere and set up a group buy.
Hakop, you were a member since July 2009, you could've easily been a part of the group buy when it was going on. Now that the pieces are finished and look amazing, it's easy to say, "Hey, let me get this diffuser or that spoiler." You have no R&D development time to wait for like we did. That's not fair and it's insulting. If I was Neal and/or Euroteck, and was a man of my word, I'd straight up say, "No, too bad, you missed your chance." That was one of the major selling points to me, to know only 9 other people on the planet besides myself will have this piece. Exclusivity is an amazing thing, and we paid and waited for that. Now others are trying to take that away, that's not cool. Go elsewhere and set up a group buy.
#421
Banned
Join Date: Oct 2011
Location: Fresno , Ca
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
2003 cl55 amg, 2008 Range Rover Sport SC
All I heard was wah wah wah!!!!!!! Who are you to say who gets a set or not??? If you ask me, I don't see your copyright on the piece. Now as for us wanting a piece. Sorry to say but $$$ talks. So with being said more will I push a group buy. Eurotek is not required to tell or ask your pernission to sell there products!
#422
Junior Member
Join Date: Jul 2009
Location: North Hollywood
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
2005 CL55
I will be really disappointed if these go on sale again. This was strictly a limited edition 10 member group buy. Where the hell were you guys when we needed members to finish up the list? F()ck that! I'm sure the same people are going to want a set of carbon fiber side skirts when we get them. I take pride, as I'm sure the other W215 Euroteck group buy members do, that we have ultra rare carbon fiber parts for our cars that we put our time, money and patience into to be the ones with the rare parts, not knowing when they'd be finished or what they'd look like.
Hakop, you were a member since July 2009, you could've easily been a part of the group buy when it was going on. Now that the pieces are finished and look amazing, it's easy to say, "Hey, let me get this diffuser or that spoiler." You have no R&D development time to wait for like we did. That's not fair and it's insulting. If I was Neal and/or Euroteck, and was a man of my word, I'd straight up say, "No, too bad, you missed your chance." That was one of the major selling points to me, to know only 9 other people on the planet besides myself will have this piece. Exclusivity is an amazing thing, and we paid and waited for that. Now others are trying to take that away, that's not cool. Go elsewhere and set up a group buy.
Hakop, you were a member since July 2009, you could've easily been a part of the group buy when it was going on. Now that the pieces are finished and look amazing, it's easy to say, "Hey, let me get this diffuser or that spoiler." You have no R&D development time to wait for like we did. That's not fair and it's insulting. If I was Neal and/or Euroteck, and was a man of my word, I'd straight up say, "No, too bad, you missed your chance." That was one of the major selling points to me, to know only 9 other people on the planet besides myself will have this piece. Exclusivity is an amazing thing, and we paid and waited for that. Now others are trying to take that away, that's not cool. Go elsewhere and set up a group buy.
#423
Banned
Join Date: Nov 2008
Posts: 1,357
Likes: 0
Received 3 Likes
on
3 Posts
MB; 55KCL AMG, SL550 SLS AMG G500 Cabrio 280SL ML350 CLS550 ML500 E55 AMG CL500 S600 SLK32 AMG
All I heard was wah wah wah!!!!!!! Who are you to say who gets a set or not??? If you ask me, I don't see your copyright on the piece. Now as for us wanting a piece. Sorry to say but $$$ talks. So with being said more will I push a group buy. Eurotek is not required to tell or ask your pernission to sell there products!
#425
Banned
Join Date: Oct 2011
Location: Fresno , Ca
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
2003 cl55 amg, 2008 Range Rover Sport SC
The guy who constantly keeps criticizing Euroteck and their methods now is begging them to make him a piece. You're pathetic. Money talks, but if you knew how to read, you'd know this was a limited production piece. Go on eBay, I'm sure they have stuff for your car, like all of the other pieces you bought from there
Again buddy wah wah does the baby need his bottle. Does it make you mad that you had to save your pennies and put together a group and wait wait wait only because you couldnt afford the real cost? Wow didn't know that eBay sold parts for my car? Somebody speaks from experience. Anyways I have nothing against eurotek beside that he takes forever. It's
not my fault I have money to flash and break rules.. Lol. Btw I wasn't even looking to buy one. Just to **** you off and the other group buyers I should buy one and post pics about it! Lol