Eurocharged and My 859.5 Rwtq 600rwhp Cl 65
#1
Eurocharged and My 859.5 Rwtq 600rwhp Cl 65
Can't say enough good things about Eurocharged and Jerry. I have a Cl 65 after building an E55 that Jerry also helped out with and getting it spot on after each mod I added on the dyno. But now totally stock not even an upgraded Johnson pump 100% stock, Jerry managed to get a tune on my car with A/F's that mimic the stock A/F's throughout the rpm range to put down 600rwhp and a monsterous 860rwtq. Not to mention today here in Atlanta the ambient air temp was at 90 degree's with high humidity. So factoring only a moderate 17% drivetrain loss thats 1006 Crank Torque and 702 Crank horse power. Thanks again Jerry... I've attached a dyno graph from the Stock run to tuned run. We lost the tach signal around 4k on some of the runs. Video will be to follow!
#3
Senior Member
Can't say enough good things about Eurocharged and Jerry. I have a Cl 65 after building an E55 that Jerry also helped out with and getting it spot on after each mod I added on the dyno. But now totally stock not even an upgraded Johnson pump 100% stock, Jerry managed to get a tune on my car with A/F's that mimic the stock A/F's throughout the rpm range to put down 600rwhp and a monsterous 860rwtq. Not to mention today here in Atlanta the ambient air temp was at 90 degree's with high humidity. So factoring only a moderate 17% drivetrain loss thats 1006 Crank Torque and 702 Crank horse power. Thanks again Jerry... I've attached a dyno graph from the Stock run to tuned run. We lost the tach signal around 4k on some of the runs. Video will be to follow!
Does it start off with a standard Eurocharged firmware flash and then adjusts it to what it can do? Or is every one that he does is custom?
Isn't the CL65 difficult to dyno.. read somewhere on the forum.
Saving my Pennies for the same mod..