How to remove CL Hood Flat Badge
#1
Senior Member
Thread Starter
How to remove CL Hood Flat Badge
Anyone know how to remove the CL Hood Star Flat Badge? It's not like the old badges where you turn something and it pops out.
Bought a nice AMG logo flat badge which seems to have two prongs only.
Bought a nice AMG logo flat badge which seems to have two prongs only.
#2
Super Member
Join Date: Jan 2004
Location: Del Mar, CA
Posts: 939
Likes: 0
Received 4 Likes
on
4 Posts
2003 CL600 2005 745Li
Yes, I just changed mine out.
I removed the hood latch from the underside of the hood, you will see the 2 small holes then. Just push up thru the holes with a small screw driver or nail.
.
I removed the hood latch from the underside of the hood, you will see the 2 small holes then. Just push up thru the holes with a small screw driver or nail.
.
#5
Senior Member
Thread Starter
I bought the Japanese one on Ebay for the CL65. Very nice quality.
To bad the holes were going the wrong way.
No way to find out till I popped the stock one off. And it was going the wrong direction (the two holes making a horizon).
The directions were perfect, Thanks Man!
Now I need to find one that fits.. I'll check out that link.
To bad the holes were going the wrong way.
No way to find out till I popped the stock one off. And it was going the wrong direction (the two holes making a horizon).
The directions were perfect, Thanks Man!
Now I need to find one that fits.. I'll check out that link.
#6
Senior Member
Thread Starter
![Confused](https://mbworld.org/forums/images/smilies/confused.gif)
#7
Senior Member
Thread Starter
Trending Topics
#9
Senior Member
Thread Starter
#10
MBWorld Fanatic!
Join Date: Feb 2010
Location: Los Angeles
Posts: 1,477
Likes: 0
Received 5 Likes
on
5 Posts
04 CL55 (sold), 2012 CLS550 (sold), 2014 S550 (sold), 2015 ES300H (DAILY)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
I've been looking for a custom hood badge for a really long time now.
I bought one off JBSpeed a couple months ago (claimed it would fit) but it didnt, so I got the sticker and put it over the triangle. I think it looks pretty decent!
horrible camera quality sorry
#11
Senior Member
Thread Starter
How did you remove it, or did you just cover it?
But as far as the hood badges go, that one from Japan on Ebay works. Nice quality. I added some glue to the prongs before it went on..
*Note to self, do not drop anything like a small screw driver or bolts down where the fan is, your gonna freak out!
Cover your cooled down if not cold engine with a large sheet before you work on your hood.
** I had to get the Snake-Cam with Videoscope to find that small screwdriver, talk about nerve racking and a freak out espisode, I did not dare start the car till I saw and extracted the screwdriver that did the impossible acrobatic drop right between the fan shroad and engine.
Last edited by NRL; 10-17-2011 at 01:57 PM.
#12
MBWorld Fanatic!
Join Date: Feb 2010
Location: Los Angeles
Posts: 1,477
Likes: 0
Received 5 Likes
on
5 Posts
04 CL55 (sold), 2012 CLS550 (sold), 2014 S550 (sold), 2015 ES300H (DAILY)
Oh, the horrible red triangle.. yes, that's the one everyone comments on when they get in the car for the first time.. Quite annoying.
How did you remove it, or did you just cover it?
But as far as the hood badges go, that one from Japan on Ebay works. Nice quality. I added some glue to the prongs before it went on..
*Note to self, do not drop anything like a small screw driver or bolts down where the fan is, your gonna freak out!
Cover your cooled down if not cold engine with a large sheet before you work on your hood.
** I had to get the Snake-Cam with Videoscope to find that small screwdriver, talk about nerve racking and a freak out espisode, I did not dare start the car till I saw and extracted the screwdriver that did the impossible acrobatic drop right between the fan shroad and engine.
How did you remove it, or did you just cover it?
But as far as the hood badges go, that one from Japan on Ebay works. Nice quality. I added some glue to the prongs before it went on..
*Note to self, do not drop anything like a small screw driver or bolts down where the fan is, your gonna freak out!
Cover your cooled down if not cold engine with a large sheet before you work on your hood.
** I had to get the Snake-Cam with Videoscope to find that small screwdriver, talk about nerve racking and a freak out espisode, I did not dare start the car till I saw and extracted the screwdriver that did the impossible acrobatic drop right between the fan shroad and engine.
Yea, I thought it was quite hideous as well. It sticks out like a sore thumb. All I did was get the AMG sticker from the hood emblem and stick it over the triangle. People always ask me, "whats that AMG button do?" LOL!! I tell them that it adds 100hp like the M button...
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
I'm glad you found that screw! Anything loose inside your engine is nerve racking...