raise ride height button question
#1
Junior Member
Thread Starter
raise ride height button question
Ok ya I'm a newbie ! so i was testing things out in my garage and i pushed the ride height button and yes it went up around an inch or so .
my question is how does it go back down ? it looks lie a 4x4 sitting in my garage like that . only had a test drive and have not been able to drive here because of road conditions .
Dave
my question is how does it go back down ? it looks lie a 4x4 sitting in my garage like that . only had a test drive and have not been able to drive here because of road conditions .
Dave
#2
Banned
Join Date: Nov 2012
Posts: 331
Likes: 0
Received 8 Likes
on
8 Posts
550HP+ ///AMG CL55 Kompressor, Ducati 916bp, Yamaha R1 WSBK replica
When there are no little red lights illuminated, it's at it's lowest, normal driving position.
Press it once and one light comes on, raising it up 0.5".
Press it once again, and the car raises to the maximum position, 0.95" higher then stock.
Keep pressing to cycle through the levels.
One day left on the lowering link sale I found btw:
https://mbworld.org/forums/cl55-amg-...-lowering.html
Press it once and one light comes on, raising it up 0.5".
Press it once again, and the car raises to the maximum position, 0.95" higher then stock.
Keep pressing to cycle through the levels.
One day left on the lowering link sale I found btw:
https://mbworld.org/forums/cl55-amg-...-lowering.html
#3
Junior Member
Thread Starter
the lights are off but it is still not quite back where it was .
this was just sitting in the garage with the engine running so that's why i wondered if i need to be rolling for it to settle back down ?
Dave
this was just sitting in the garage with the engine running so that's why i wondered if i need to be rolling for it to settle back down ?
Dave