CL55 AMG, CL65 AMG, CL63 AMG (C215, C216) 2000 - 2014 (Two Generations)

Multiple Sudden Malfunctions! Help!

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 12-29-2014, 02:33 PM
  #1  
Senior Member
Thread Starter
 
khutchinson22's Avatar
 
Join Date: Dec 2014
Posts: 286
Likes: 0
Received 4 Likes on 4 Posts
CL55
Multiple Sudden Malfunctions! Help!

Driving into work this morning all the power is gone. It's like The supercharger is gone. I get off the highway and I get ESP malfunction the about a mile later ABC malfunction. I ran codes and all that comes up is Secondary Air Injection.

Any ideas?
Old 12-29-2014, 02:47 PM
  #2  
Former Vendor of MBWorld
iTrader: (1)
 
shardul's Avatar
 
Join Date: May 2008
Location: Houston
Posts: 12,139
Received 293 Likes on 242 Posts
2003 W211 E55, 2003 W220 S600
check all the drive belts.

seems like you have an idler pulley failure.
Old 12-29-2014, 03:47 PM
  #3  
Senior Member
Thread Starter
 
khutchinson22's Avatar
 
Join Date: Dec 2014
Posts: 286
Likes: 0
Received 4 Likes on 4 Posts
CL55
That was exactly it. Somehow the belt came off.
Old 12-29-2014, 04:46 PM
  #4  
Former Vendor of MBWorld
iTrader: (1)
 
shardul's Avatar
 
Join Date: May 2008
Location: Houston
Posts: 12,139
Received 293 Likes on 242 Posts
2003 W211 E55, 2003 W220 S600
time to replace them with after market ones
Old 01-01-2015, 01:35 PM
  #5  
Senior Member
Thread Starter
 
khutchinson22's Avatar
 
Join Date: Dec 2014
Posts: 286
Likes: 0
Received 4 Likes on 4 Posts
CL55
There is a little bit of a wobble in my supercharger pulley. Is this something I should be concerned about? I've tried tightening the others. One seems to have a stripped bolt (not the tensioner or harmonic.....I'm assuming the ABC???) The belt is jumping off frequently and I hear a squeak.
Old 01-06-2015, 01:00 AM
  #6  
Senior Member
Thread Starter
 
khutchinson22's Avatar
 
Join Date: Dec 2014
Posts: 286
Likes: 0
Received 4 Likes on 4 Posts
CL55
Solved!

The idler pulley bolt hole on the front engine cover had been stripped out causing the SC belt to be thrown off. Replaced the bolt with a longer one that allowed me to put a nut on the other end to tighten it back down. Worked perfect.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Multiple Sudden Malfunctions! Help!



All times are GMT -4. The time now is 09:24 AM.