FS: RENNtech, KLEEMANN, misc stuff...
#1
Super Member
Thread Starter
Join Date: Jan 2002
Location: NorCal - SF
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes-Benz
FS: RENNtech, KLEEMANN, misc stuff...
OK. I was told by the boss that before I buy anything else, I need to get rid of some stuff. So, Here we go…
Power Folding Mirrors 211
This was supposed to go onto my 211 E55. I never got around to installing them. Comes with the switch. If I recall correctly, you need STAR programming to make them auto-fold. Please do a search for more info.
RENNtech Monolites (staggered)
19 x 9 (ET30) 19 x 11 (ET39)
Yes, you read correctly. This set DOES have an 11” REAR. I’ve heard from RENNtech that this was a limited production set. Bridgestone S03s w/some tire life left (fronts are better than the rears). I need to check the tire specs when I get home. I had these on my 211 E55 and the 11” rear did NOT rub. However, the car was NOT lowered. NO bends, but, there are curb marks here and there and the RENNtech sticker on 1 or 2 of the wheels is partially gone. Comes with RENNtech center caps. These wheels would fit a SL as well. Link to the RENNtech and Kleemann pics: https://mbworld.org/forums/showpost....&postcount=757
RENNtech Monolites (non-staggered)
19 x 9 (ET39)
Yokohama Advan ST, 285/45/19
This set was on our ML55. No bends or curbs however the lips could use a polish. Comes with MB center caps. This set should fit the big body MBs like the S, and CL.
Partial pic of the ML w/ the wheels on:
http://i22.photobucket.com/albums/b3...h/RENNtech.jpg
RENNtech CF airbox w/ Green filters.
This is off our 208 CLK55. It should bolt right onto a 210 E55 and a 202 C43 as well. Other MB V8s might work with some mods. There is a slight scrape/blemish in the clear coat at the center of the box.
RENNtech spoiler
This was off the 211 E55. Just painted 040 black, I believe it needs new adhesive for install. This has been sitting at my friend’s shop and he’s been bugging me to pick it up.
KLEEMANN TS-6 (staggered)
19x8.5, 19x10 ET36 w/ 2 spares*
These are also of my 211E55. Kleemann bolt-in spacers were used to achieve the proper offset for the front. These are included in the sale. Like new Vredstein tires. *1 wheel is bent and basically toast. The faces of the two spares need to be swapped and you will have a complete set w/ 1 spare rear wheel.*
Link to the RENNtech and Kleemann pics:
https://mbworld.org/forums/showpost....&postcount=757
HRE 640
20 x 10 (stepped lip)
This set is off our ML55. Tires are basically shot, but still mounted. There are no bends, however, the wheels could use a polish or refinish.
HRE 640R
20 x 9.5 (reverse lip, staggered lips front/back)
I want to keep this set. It is basically flawless and the tires (Pirelli Scorpions) have lots of tread on them. They require a small spacer to fit the ML55.
Carlsson 2/5s
19 x 8, 19 x 10
Off our 208 CLK55. Includes spacers for the rears. Perfect fit, no rubbing. I need to pull this set out and check on the condition. If I remember correctly, there are no bends, however, there might be some curb marks. I believe the tires are shot.
Axis Se7ens (3pc)
19 x 8, 19 x 10
Multi-piece set that was on Jon Pek’s 202 show car. We used it on the 208 CLK55, includes spacers for the rears. I need to double check but 1 or 2 of the fronts needs to be repaired due to a nice pothole. No tires.
HPS Gen 1 SC
It is used and off a ML55. To my knowledge has all the parts needed to install. I state this because I never got around to having it installed and it is still sitting in the boxes it came in. I might still use this on another car, however, for now it is just sitting there. If the offer is right, it goes.
Not sure if there is much interest in this; not sure why I kept it. I had airmatic failure on my front driver side shock on the 211 E55. I was told at the time that I needed to replace both. I want to say the part was $1100-ish each?!? Anyway, I kept the old parts. Driver side is “shot,” but, the passenger side was fine when removed.
I probably have some other stuff lying around (stock head units, 208/210 Euro Comand) and will update as I find it. I will also update the specs of the items when I have a chance to dust them off.
For those wondering, no, I don’t have an auto shop, store, etc. I’d like to sell some of this stuff so friends and family would stop giving me the WTF? look when they hear about the “collection” of car stuff. I haven’t listed prices; I think you guys know what this stuff is worth. That being said, I will listen to REASONABLE offers. I’m not going to insult you with an inflated price, please return the favor. Thanks for looking. Shoot me an email with offers and or questions. I will have tomorrow free to pull all this crap out for pics, etc. Buyer pays shipping.
Email: aintME @ gmail dot com
Power Folding Mirrors 211
This was supposed to go onto my 211 E55. I never got around to installing them. Comes with the switch. If I recall correctly, you need STAR programming to make them auto-fold. Please do a search for more info.
RENNtech Monolites (staggered)
19 x 9 (ET30) 19 x 11 (ET39)
Yes, you read correctly. This set DOES have an 11” REAR. I’ve heard from RENNtech that this was a limited production set. Bridgestone S03s w/some tire life left (fronts are better than the rears). I need to check the tire specs when I get home. I had these on my 211 E55 and the 11” rear did NOT rub. However, the car was NOT lowered. NO bends, but, there are curb marks here and there and the RENNtech sticker on 1 or 2 of the wheels is partially gone. Comes with RENNtech center caps. These wheels would fit a SL as well. Link to the RENNtech and Kleemann pics: https://mbworld.org/forums/showpost....&postcount=757
RENNtech Monolites (non-staggered)
19 x 9 (ET39)
Yokohama Advan ST, 285/45/19
This set was on our ML55. No bends or curbs however the lips could use a polish. Comes with MB center caps. This set should fit the big body MBs like the S, and CL.
Partial pic of the ML w/ the wheels on:
http://i22.photobucket.com/albums/b3...h/RENNtech.jpg
RENNtech CF airbox w/ Green filters.
This is off our 208 CLK55. It should bolt right onto a 210 E55 and a 202 C43 as well. Other MB V8s might work with some mods. There is a slight scrape/blemish in the clear coat at the center of the box.
RENNtech spoiler
This was off the 211 E55. Just painted 040 black, I believe it needs new adhesive for install. This has been sitting at my friend’s shop and he’s been bugging me to pick it up.
KLEEMANN TS-6 (staggered)
19x8.5, 19x10 ET36 w/ 2 spares*
These are also of my 211E55. Kleemann bolt-in spacers were used to achieve the proper offset for the front. These are included in the sale. Like new Vredstein tires. *1 wheel is bent and basically toast. The faces of the two spares need to be swapped and you will have a complete set w/ 1 spare rear wheel.*
Link to the RENNtech and Kleemann pics:
https://mbworld.org/forums/showpost....&postcount=757
HRE 640
20 x 10 (stepped lip)
This set is off our ML55. Tires are basically shot, but still mounted. There are no bends, however, the wheels could use a polish or refinish.
HRE 640R
20 x 9.5 (reverse lip, staggered lips front/back)
I want to keep this set. It is basically flawless and the tires (Pirelli Scorpions) have lots of tread on them. They require a small spacer to fit the ML55.
Carlsson 2/5s
19 x 8, 19 x 10
Off our 208 CLK55. Includes spacers for the rears. Perfect fit, no rubbing. I need to pull this set out and check on the condition. If I remember correctly, there are no bends, however, there might be some curb marks. I believe the tires are shot.
Axis Se7ens (3pc)
19 x 8, 19 x 10
Multi-piece set that was on Jon Pek’s 202 show car. We used it on the 208 CLK55, includes spacers for the rears. I need to double check but 1 or 2 of the fronts needs to be repaired due to a nice pothole. No tires.
HPS Gen 1 SC
It is used and off a ML55. To my knowledge has all the parts needed to install. I state this because I never got around to having it installed and it is still sitting in the boxes it came in. I might still use this on another car, however, for now it is just sitting there. If the offer is right, it goes.
Not sure if there is much interest in this; not sure why I kept it. I had airmatic failure on my front driver side shock on the 211 E55. I was told at the time that I needed to replace both. I want to say the part was $1100-ish each?!? Anyway, I kept the old parts. Driver side is “shot,” but, the passenger side was fine when removed.
I probably have some other stuff lying around (stock head units, 208/210 Euro Comand) and will update as I find it. I will also update the specs of the items when I have a chance to dust them off.
For those wondering, no, I don’t have an auto shop, store, etc. I’d like to sell some of this stuff so friends and family would stop giving me the WTF? look when they hear about the “collection” of car stuff. I haven’t listed prices; I think you guys know what this stuff is worth. That being said, I will listen to REASONABLE offers. I’m not going to insult you with an inflated price, please return the favor. Thanks for looking. Shoot me an email with offers and or questions. I will have tomorrow free to pull all this crap out for pics, etc. Buyer pays shipping.
Email: aintME @ gmail dot com
#2
MBWorld Fanatic!
Join Date: Nov 2005
Location: Fallon, NV
Posts: 1,248
Likes: 0
Received 3 Likes
on
3 Posts
BMW and Mercedes
So let me get this right.....you don't want us to insult you with overinflated offers?
(j/k) Looks like you have a lot of nice stuff to get rid of. Good luck w/ the sale and premature bump
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
#3
Super Member
Thread Starter
Join Date: Jan 2002
Location: NorCal - SF
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes-Benz
#5
MBWorld Fanatic!
Join Date: Sep 2005
Location: Nova / Rockville
Posts: 1,358
Likes: 0
Received 0 Likes
on
0 Posts
Custom CLK / 05 E500 4matic / 04 Acura TL <<Daily
HPS Gen 1 SC
It is used and off a ML55. To my knowledge has all the parts needed to install. I state this because I never got around to having it installed and it is still sitting in the boxes it came in. I might still use this on another car, however, for now it is just sitting there. If the offer is right, it goes.
Pm me with price will it work on a W208?
It is used and off a ML55. To my knowledge has all the parts needed to install. I state this because I never got around to having it installed and it is still sitting in the boxes it came in. I might still use this on another car, however, for now it is just sitting there. If the offer is right, it goes.
Pm me with price will it work on a W208?
Trending Topics
#8
MBWorld Fanatic!
Join Date: Apr 2006
Location: Maryland
Posts: 8,137
Likes: 0
Received 25 Likes
on
17 Posts
Eurocharged 2004 E500, Eurocharged ECU/TCU 2005 SL600, 2010 Caddy SwaggerWagon
Email sent. Intersted in the non-staggered monolites and HREs from your ML55. I think these should fit my R500.
#9
Super Member
![Question](https://mbworld.org/forums/images/icons/icon5.gif)
Please shoot me a pm and let me know what you would like to get for the airbox. I will make no offer being as how I don't know what to offer. ![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
Thanks, John
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
Thanks, John
#10
MBWorld Fanatic!
making offers is tough.
why don't you tell us what you would like to get for these items so we don't insult you and have a starting point as I am sure you have a price in mind for everything listed.
you have alot of really good stuff there.
why don't you tell us what you would like to get for these items so we don't insult you and have a starting point as I am sure you have a price in mind for everything listed.
you have alot of really good stuff there.
#12
Super Member
Thread Starter
Join Date: Jan 2002
Location: NorCal - SF
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes-Benz
I assume you guys are going to do your due diligence and are going to research the current going rates for some of this stuff. Regardless of what pricing I put up, people are going to counter, etc. So, should I cushion my asking in expectation of that? Simply, if an offer is reasonable, I will sell it. If it isn’t, it sits. Do I have a price in mind? Yes. Is it flexible? Somewhat. Is it the price that makes you want the item, or is it the item itself? If you want the item, please shoot me an email/offer, and we will go from there. Either way, thanks for looking.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#14
MBWorld Fanatic!
Join Date: Apr 2006
Location: Maryland
Posts: 8,137
Likes: 0
Received 25 Likes
on
17 Posts
Eurocharged 2004 E500, Eurocharged ECU/TCU 2005 SL600, 2010 Caddy SwaggerWagon
Nah, he sent me some detailed pictures of the ones off his ML55. Nice wheels, don't get me wrong, they just need a little TLC. I'm probably a little too picky for them though. It's hard for me to purchase expensive items off of the net if they're not perfect. Especially, if you're expected to make an offer without seeing an asking price.
This seller has some nice stuff though, huh?
Good luck with the sales, aintME!
This seller has some nice stuff though, huh?
Good luck with the sales, aintME!
#15
Out Of Control!!
mmmm all that stuff for the ML55 has me interested, shoot me a price via PM for the SC and monolites. Im interested slightly in both for my 00 ML55
#18
Super Member