NIB Staggered Moven S5R (Carlsson Reps) w/tires F.S.
#1
MBWorld Fanatic!
Thread Starter
NIB Staggered Moven S5R (Carlsson Reps) w/tires F.S.
19x8.5 (et32) and 19x9.5 (et35) w/ General Exclaim UHP tires. Two were taken out to be fitted on the car. I waited about 2 months for the et32 fronts to come in because the salesman as well as Moven told me they would clear the C230 sport calipers w/o a spacer. Turns out they were wrong. Looks like about a 10mm but no more than a 12mm spacer would be needed if you want to use them with the sport calipers. Will fit many other models with no spacers.
Includes chrome lugs- I have a new sets of 12mm and 14mm lug bolts. I also have 2x 5mm spacers if the buyer wants those for some reason also.
Naturally they are in fantastic condition- they haven't even been mounted. I believe the tires still have the stickers on the tread even.
$1500 plus shipping/paypal. I have perfect feedback on ebay (bumpnzx3)
http://www.imagestation.com/album/pi...?id=2090418830
Includes chrome lugs- I have a new sets of 12mm and 14mm lug bolts. I also have 2x 5mm spacers if the buyer wants those for some reason also.
Naturally they are in fantastic condition- they haven't even been mounted. I believe the tires still have the stickers on the tread even.
$1500 plus shipping/paypal. I have perfect feedback on ebay (bumpnzx3)
http://www.imagestation.com/album/pi...?id=2090418830
Last edited by bumpnzx3; 10-03-2007 at 10:37 PM.
#5
MBWorld Fanatic!
Thread Starter
It really sucks- I love these wheels too. It makes me furious when people say they will fit a car- and they don't. To make matters worse- the guy my salesman dealt with at Moven, the same guy that I talked to at Moven (Dean) no longer works there!!! Gee- I wonder why he got canned
Know the product you are selling folks!!
Know the product you are selling folks!!
Trending Topics
#11
MBWorld Fanatic!
If I didn't have some other stuff I have to take care of first, I would gladly take those off your hands. They look awesome. I'd try them out with hubcentric spacers if I were you.
#12
MBWorld Fanatic!
Thread Starter
I doubled up a 5mm spacer I had laying around just to see what it would look like. It just barely cleared the caliper- but it pushed the wheel out a little too far for my liking. Maybe a 1/4" or so further than the fender line. The rear tucked and luck beautiful though- no spacer.
#15
MBWorld Fanatic!
Join Date: Mar 2007
Location: Mid-west
Posts: 5,882
Likes: 0
Received 0 Likes
on
0 Posts
IS300
#17
MBWorld Fanatic!
Does Moven have other fronts that would fit? I'm curious because I think yours would probably clear stock C43 breaks since they don't have any pistons on the front, but I would like to upgrade the brakes eventually.
#18
MBWorld Fanatic!
Thread Starter
I don't think so (as far as a W203 is concerned)- but I'm not sure. I asked about other wheels of theirs once I found mine wouldn't work. One guy told me all of their wheels would fit- then another guy there told me the area behind the spokes of the wheels were more or less the same.....I took that to mean it was a no go since the set I ordered didn't work out for me. But then again- I don't know about the hub design on your car. There's a good chance it could work. Maybe someone who knows more than I could chime in here. I would be happy to take any measurements you need or answer any questions you might have in order to find out if they would work out.
Just pick up these wheels and rock them for a while until you upgrade brakes
Just pick up these wheels and rock them for a while until you upgrade brakes
Last edited by bumpnzx3; 10-07-2007 at 12:32 AM.
#19
Super Member
#20
MBWorld Fanatic!
Thread Starter
As long as you don't have upgraded brakes you should be fine. You might check in your particular area of the forum just to be sure though. The tires are 235's and 265's- you are correct. I bought the setup from Charles at Wheel Auto Haus.