leozip

Up for sale is one of my sets of wheels. I actually just bought them but decided to sell it due to another purchase I'm doing it. Let's go to business.
(4) BBS RS-GT Diamond Black 19x8.5 +38 offset, 5x112 bolt pattern. Tires are 245/35/19 Khumo SPT's with plenty of thread left, about 85%. Wheels are Two-piece Forged and weights around 21 lbs, one of the lighest and strongest wheels on the market. They cost $986 each new. So for a brand new set, you looking to spend around $4600 with tires.

Wheels are in excellent conditions, NO Bends NO rashes. It fits TPMS. Will include hardware and BBS Valve caps (extra).
Priced for a quick sale: $2950 Shipped to your door (firm)

Here's some pics of the wheels:






I borrowed this pic, same wheels.

SPORTPK

what other cars do they fit?

leozip

Mercedes... Same bolt patterns and similar offsets. I was running a 10mm H&R Spacers for a more staggered look.

bumpnzx3

how about the hub bore? mercedes is larger than audi. i'm not too familiar with that brand. do they come in more than one bore size? if so- it could have been a larger bore and rings were used for them to fit the audi?

either way- good looking set of wheels.

leozip

You don't know BBS wheels? They fit the MB's no problem, I've seen tons of Audis with MB wheels and no problem.

advans

depends.

Audi's can run MB wheels because the AUDI bore is smaller and you can put a hub ring and be good to go!

but, for MBs, possibly might not fit a AUDI rim if you ordered it "car specific", MB runs a bigger bore, so..it won't fit.

leozip

The BBS are not car specific and you can buy the same wheels on tirerack for Audi and MB.

bumpnzx3

they may not be car specific- but i thought they were offered in different hub bores. i just wasn't sure which model was offered in certain bores. i am quite familiar with their wheels.

did they need hub rings to fit your audi? if not- then they aren't going to fit a benz

OJwerks

those are nice but may be a little hard to sell for the MB guys because they are not staggered....

leozip

They have rub rings for the Audi.

bumpnzx3

good deal- then good luck with your sale. i was thinking of joining the bbs bandwagon, but i ordered something else. i didn't really want to spend the money on a new set- and nothing was available to fit my application used for about a month- so i ordered something else.

advans

if they have hub rings then its MB bored. you should take a MM ruler and measure the diameter of the bore, it should come out to 50 something. I believe 58 or so. something like that, I am not 100% sure.

EUROTEK//AMG

bump for sick wheels!