Oil Change
06-29-2006 | 11:01 AM
#1
Thread Starter
Member
Joined: Feb 2006
Posts: 184
Likes: 0
From: Houston, Texas
CLK 430 Coupe
Oil Change
Hey All, I just had my personal mechanic change my oil and I was in a really big hurry and rushing to get somewhere, and somehow he forgot to reset my engine oil service ( you know 1,000 miles till service warning) and I was just wondering if there is an easy way for me to do it or if i should just bring it back to him.
??????
??????
06-30-2006 | 07:42 AM
#3
Member
Joined: Feb 2002
Posts: 166
Likes: 0
From: Minnesota
2005 S55 1982 300dt
1. Get in your car and close door.
2. Your cluster should read whatever the odometer says.
3. Put key in position 2 and push 0 button twice. (This is when it should say "Service now").
4. Press 0 key again and hold.
5. Return key to position 0 (keep it there for 1 sec) while holding 0 button then return to position 2.
6. Wait about 10 seconds while holding button 0 and it should beep and say "Service in 10000" (That is the only beep I hear when performing this)
2. Your cluster should read whatever the odometer says.
3. Put key in position 2 and push 0 button twice. (This is when it should say "Service now").
4. Press 0 key again and hold.
5. Return key to position 0 (keep it there for 1 sec) while holding 0 button then return to position 2.
6. Wait about 10 seconds while holding button 0 and it should beep and say "Service in 10000" (That is the only beep I hear when performing this)
07-03-2006 | 09:46 AM
#7
Thread Starter
Member
Joined: Feb 2006
Posts: 184
Likes: 0
From: Houston, Texas
CLK 430 Coupe
Originally Posted by reitmeid
1. Get in your car and close door.
2. Your cluster should read whatever the odometer says.
3. Put key in position 2 and push 0 button twice. (This is when it should say "Service now").
4. Press 0 key again and hold.
5. Return key to position 0 (keep it there for 1 sec) while holding 0 button then return to position 2.
6. Wait about 10 seconds while holding button 0 and it should beep and say "Service in 10000" (That is the only beep I hear when performing this)
2. Your cluster should read whatever the odometer says.
3. Put key in position 2 and push 0 button twice. (This is when it should say "Service now").
4. Press 0 key again and hold.
5. Return key to position 0 (keep it there for 1 sec) while holding 0 button then return to position 2.
6. Wait about 10 seconds while holding button 0 and it should beep and say "Service in 10000" (That is the only beep I hear when performing this)
Thanks Very Much. It was very uselful.
