Interesting Bodykit
07-27-2006, 05:08 PM
#1
Super Member
Thread Starter
Join Date: Jul 2003
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
W208 CLK55K, GTR, RS5
Interesting Bodykit
Interesting bodykit. Anyone have it or willing to try it? I'm not the seller, I was just browing Ebay.
http://cgi.ebay.com/ebaymotors/1998-...10009962QQrdZ1
http://cgi.ebay.com/ebaymotors/1998-...10009962QQrdZ1
07-27-2006, 05:34 PM
#3
Member
Join Date: Apr 2005
Location: NYC
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Clk320
I bought the skirts from this kit They should be here between tuesday and thursday. I was scared to order the whole kit though because I had never heard of ExtremeDimensions. They have been featured in several tuner magazines and They are mentioned in Need for speed most wanted. The pics I saw of their kits (Articles can be viewed on the website) looked realy good (but so can any kit put on by the right professionals). I am gonna try and dry fit the skirts myself before painting so I will let you guys know. It is a little scary that they dont have the kit fitted on a car for show yet and this kit has been out for at least 2 months. The guy on ebay told me no complaints from customers so far and the guy on the phone assured me that if I had any problems that they would be resolved. I also read that they offer exellent customer service so we shall soon see.
Last edited by ClkE20; 07-27-2006 at 08:53 PM.
07-27-2006, 05:42 PM
#5
Newbie
Join Date: Oct 2005
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
the orginal kit was designed and fabbed by my brother in law Patrick from Aerogear for there urogear line and was shown at SEMA 02 in the Aerogear booth. But since nobody moddied the clk that time it didnt go into production. Honestly I can say if this is from the orginal mold the fitment is pretty bad, also the kit they are selling is missing some pieces. We have the complete kit at are R&D and retooling it as we speak and test fitting it on my clk. .
07-27-2006, 06:22 PM
#6
MBWorld Fanatic!
Originally Posted by cparedes01
the orginal kit was designed and fabbed by my brother in law Patrick from Aerogear for there urogear line and was shown at SEMA 02 in the Aerogear booth. But since nobody moddied the clk that time it didnt go into production. Honestly I can say if this is from the orginal mold the fitment is pretty bad, also the kit they are selling is missing some pieces. We have the complete kit at are R&D and retooling it as we speak and test fitting it on my clk. .
Trending Topics
07-27-2006, 06:49 PM
#8
Newbie
Join Date: Oct 2005
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
it should be soon, orginally i was just going to put it on my car, I wanted something new and different, and since its been just sitting in storage since 02 i might as well put it on, but if there is any interest we can put it back out for production. And because its our own, we can sell it way cheaper than what they are asking and you wouldnt have to worry about fittment.
btw just getting the SS alone might not look right without the front and rear. The bottom of the SS kind of flare out to match the front and rear. Also the kit E.D is selling doesnt have the door cap, if you look at our car it slopes in at the bottom so if you have that SS it will slope in and back out thats why we made door caps so everythings flushed.
btw just getting the SS alone might not look right without the front and rear. The bottom of the SS kind of flare out to match the front and rear. Also the kit E.D is selling doesnt have the door cap, if you look at our car it slopes in at the bottom so if you have that SS it will slope in and back out thats why we made door caps so everythings flushed.
07-27-2006, 08:10 PM
#13
Newbie
Join Date: Oct 2005
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 55 ON IT
PM sent.
Last edited by cparedes01; 07-27-2006 at 08:18 PM.
