I WENT TO THIS HIGH END
12-16-2009, 05:07 PM
#1
MBWorld Fanatic!
Thread Starter
I WENT TO THIS HIGH END
Shop 2day and does only German cars.
So since most of u know,my front camber kit broke a while back (the last shop that did my alignment broke it since they never loosen the bolt), so i had to call Kmac and get a new one and i had to redo my alignment again and results were very good and close to specsBUT FOR SOME REASON WHEN U LOOK AT MY FRONT TIRE, THE TOP OF MY TIRE is LEANING INWARD as toward the inside..DOES ANYONE KNOW WHY???
My tires were -3.3 in front and rear -3.0 and after i installed the kmac and redid the alignment, i got his:
SPEC FOR FRONT LEFT AND RIGHT IS -0.6 TO-1.3 AND I GOT -2.3 FOR LEFT AND RIGHT
CASTER IS AT 5.6 AT BOTH, WHY IS THAT?
SPEC FOR TOE IS 0.12 TO 0.29 AND I GOT 0.21 FOR BOTH SIDE
SPEC FOR STEER AHEAD IS -0.05 TO 0.05 AND I GOT 0.01
SPEC FOR REAR LEFT AND RIGHT IS -0.7 TO -1.7 AND I GOT -1.9 FOR BOTH
SPEC FOR TOE IS 0.03 TO 0.53 AND I GOT 0.17
SPEC FOR THRUST ANGLE IS -0.25 TO .025 AND I GOT 0.01
So since most of u know,my front camber kit broke a while back (the last shop that did my alignment broke it since they never loosen the bolt), so i had to call Kmac and get a new one and i had to redo my alignment again and results were very good and close to specsBUT FOR SOME REASON WHEN U LOOK AT MY FRONT TIRE, THE TOP OF MY TIRE is LEANING INWARD as toward the inside..DOES ANYONE KNOW WHY???
My tires were -3.3 in front and rear -3.0 and after i installed the kmac and redid the alignment, i got his:
SPEC FOR FRONT LEFT AND RIGHT IS -0.6 TO-1.3 AND I GOT -2.3 FOR LEFT AND RIGHT
CASTER IS AT 5.6 AT BOTH, WHY IS THAT?
SPEC FOR TOE IS 0.12 TO 0.29 AND I GOT 0.21 FOR BOTH SIDE
SPEC FOR STEER AHEAD IS -0.05 TO 0.05 AND I GOT 0.01
SPEC FOR REAR LEFT AND RIGHT IS -0.7 TO -1.7 AND I GOT -1.9 FOR BOTH
SPEC FOR TOE IS 0.03 TO 0.53 AND I GOT 0.17
SPEC FOR THRUST ANGLE IS -0.25 TO .025 AND I GOT 0.01
