???
DYNO Results - CLK320 Hi Flow Exhaust Manifolds / V6 Headers
MBWorld Fanatic!
Joined: Feb 2007
Posts: 1,348
Likes: 2
From: Northern VA / DC
CLK 320 (2001) and 2015 GTR
MBWorld Fanatic!
Joined: May 2005
Posts: 1,843
Likes: 4
From: KCMO, but Houston is my home.
01 CLK 430
MBWorld Fanatic!
Joined: Feb 2007
Posts: 1,348
Likes: 2
From: Northern VA / DC
CLK 320 (2001) and 2015 GTR
MB World Stories
The Best of Mercedes & AMG
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
MBWorld Fanatic!
Joined: May 2005
Posts: 1,843
Likes: 4
From: KCMO, but Houston is my home.
01 CLK 430
Thread Starter
MBWorld Fanatic!
Joined: Mar 2007
Posts: 1,305
Likes: 50
From: Yokohama, Japan
2000 CLK 320
MBWorld Fanatic!
Joined: Feb 2007
Posts: 1,348
Likes: 2
From: Northern VA / DC
CLK 320 (2001) and 2015 GTR
MBWorld Fanatic!
Joined: May 2007
Posts: 1,435
Likes: 0
From: Nebraska
99CLK320,
Just got my car back from the shop. The new headers are a very nice improvement. Sounds better, runs better especially at higher rpms. Keep in mind, this is a 320. I was not expecting monster gains. Per Williams007 dyno results, even though I am not going to dyno my car, 7-10 hrspwr is probably about right. Also, Jimmy's 320 is a Japan version that has no primary cats. His down tubes that come directly off the back of the headers go straight down and to a set, of what would be on a NA car, secondary cats, then on to his SuperSprint resonator and exhaust. I may not be pulling the same hrspwr as he is cuz I have two sets of cats and a stock exhaust and no Evo pulley kit. Again, with the 320 you can't make it go real fast because the cubic inches are not there however, once I get a pulley kit on and a sport exhaust and a SprintBooster I will be done. The only other way to go beyond that is big time engine mods like cams, port and polish, turbo and big time money which is ridiculous in my book plus I aint got that kinda cheese. No offense Jimmy me boy. Keep on moddin beeotch.
MBWorld Fanatic!
Joined: May 2005
Posts: 1,843
Likes: 4
From: KCMO, but Houston is my home.
01 CLK 430
Just got my car back from the shop. The new headers are a very nice improvement. Sounds better, runs better especially at higher rpms. Keep in mind, this is a 320. I was not expecting monster gains. Per Williams007 dyno results, even though I am not going to dyno my car, 7-10 hrspwr is probably about right. Also, Jimmy's 320 is a Japan version that has no primary cats. His down tubes that come directly off the back of the headers go straight down and to a set, of what would be on a NA car, secondary cats, then on to his SuperSprint resonator and exhaust. I may not be pulling the same hrspwr as he is cuz I have two sets of cats and a stock exhaust and no Evo pulley kit. Again, with the 320 you can't make it go real fast because the cubic inches are not there however, once I get a pulley kit on and a sport exhaust and a SprintBooster I will be done. The only other way to go beyond that is big time engine mods like cams, port and polish, turbo and big time money which is ridiculous in my book plus I aint got that kinda cheese. No offense Jimmy me boy. Keep on moddin beeotch.
Junior Member
Joined: Oct 2009
Posts: 24
Likes: 0
From: Pittsburgh, PA
2002 CLK55 AMG
