Finally Got My Carlsson Kit Installed (56k Warning)
#26
Out Of Control!!
Join Date: Jun 2003
Location: Staples Center
Posts: 14,362
Likes: 0
Received 1 Like
on
1 Post
w211 & w124
Your ride is definitely tight. I was never a silver-rim guy but seeing your setup might have made me a believer. What kind of clearance do you get now in the front. I always wondered if that is going to be a problem with those speed bumps that are like 2 feet high and have an 80 degree slope?
Damn, don't ever ride around in the south bay as you will make my stock 320 look like a ford focus.
Damn, don't ever ride around in the south bay as you will make my stock 320 look like a ford focus.
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#27
Senior Member
Join Date: Jun 2002
Location: Northeast
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
02 CLK55, 07 E92 335 ProCede
Josh,
The car is very nice. Could you tell me where you got your foglights, are they made for that bumper, as I have the same kit.
Lastly what wa sthe price on the fogs.
Thanks
Derek
The car is very nice. Could you tell me where you got your foglights, are they made for that bumper, as I have the same kit.
Lastly what wa sthe price on the fogs.
Thanks
Derek
#29
MBWorld Fanatic!
Thread Starter
To answer some questions -
SoCalCLK - the Carlsson kit is fiberglass. My original bumper is the plastic that Mercedes bumpers are made of so my front bumper would be a combination of the two. The rear bumper is fiberglass, I didn't use the original bumper in the back.
I'm not going to go to the Carlsson exhaust mainly cause I already have a Remus that nicely fills the cutout, and Carlsson ones are too hard to find.
Samoan_Ridah - I have a lot less clearance in the front cause of the bumper. Speed bumps haven't been a problem so far, but driveways are another story. I've already scraped a couple of times no matter how sideways I go up them. I guess if the driveway looks bad enough, I just won't go up it. :0)
derek m - The holes in the kit are just 4" holes so any 4" foglight will fit. I got mine at pep boys for $50. They're made by Hella. And they have a little extra surprise. Take a look:
SoCalCLK - the Carlsson kit is fiberglass. My original bumper is the plastic that Mercedes bumpers are made of so my front bumper would be a combination of the two. The rear bumper is fiberglass, I didn't use the original bumper in the back.
I'm not going to go to the Carlsson exhaust mainly cause I already have a Remus that nicely fills the cutout, and Carlsson ones are too hard to find.
Samoan_Ridah - I have a lot less clearance in the front cause of the bumper. Speed bumps haven't been a problem so far, but driveways are another story. I've already scraped a couple of times no matter how sideways I go up them. I guess if the driveway looks bad enough, I just won't go up it. :0)
derek m - The holes in the kit are just 4" holes so any 4" foglight will fit. I got mine at pep boys for $50. They're made by Hella. And they have a little extra surprise. Take a look:
#31
MBWorld Fanatic!
haha... that is pretty sweet...
Josh... did you make custom angel eyes for those fog lights?... can't really really tell....
you didn't say anything to me about that.... looks sweet though... next, you should get a xenon kit into those fog lights...
Josh... did you make custom angel eyes for those fog lights?... can't really really tell....
you didn't say anything to me about that.... looks sweet though... next, you should get a xenon kit into those fog lights...
#38
MBWorld Fanatic!
Thread Starter
The work was done at Pro-Am auto body in Burbank. Their number is (818) 842-4177. Talk to Haik (pronounced hike like what you do to a football) and tell him that you were recommended by me. He'll take care of you. :0)
#40
MBWorld Fanatic!
JOSH: finally you car is done. as bruce said its a good combination the OEm bumper and the replica kits togethere. GOOD JOB dude!!ITs all worth it. Btw is the rear diffuser you painted black?is the plastics an fiberglass can be attached together?I heard from my workers at my factory, they said its impossinle to attached together. Its weird huh?can you explain for that josh?
btw guys probably for this times Iam going to go to BMW for a while since I have to wait my mercedes to come. Damn...i will posr my car later on when my big projects is done.
guys just want to clarify that Fiberworks Carlsson Rs kits and Europassion is totally different!!!! last time when i sold all the kits for CLK RS is actaly from fiberworks and the results is the products quality is totally crappy and unimagineable
Ill try to post some pics of my factory buliding bumpers and carbon fiber. hopefully my website will be rady this 2 weeks..
stay tune guys...
josh good luck modding your car ok..
btw guys probably for this times Iam going to go to BMW for a while since I have to wait my mercedes to come. Damn...i will posr my car later on when my big projects is done.
guys just want to clarify that Fiberworks Carlsson Rs kits and Europassion is totally different!!!! last time when i sold all the kits for CLK RS is actaly from fiberworks and the results is the products quality is totally crappy and unimagineable
![Mad](https://mbworld.org/forums/images/smilies/mad.gif)
Ill try to post some pics of my factory buliding bumpers and carbon fiber. hopefully my website will be rady this 2 weeks..
stay tune guys...
josh good luck modding your car ok..
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
#42
MBWorld Fanatic!
Thread Starter
Originally posted by dronellis
JOSH: finally you car is done. as bruce said its a good combination the OEm bumper and the replica kits togethere. GOOD JOB dude!!ITs all worth it. Btw is the rear diffuser you painted black?is the plastics an fiberglass can be attached together?I heard from my workers at my factory, they said its impossinle to attached together. Its weird huh?can you explain for that josh?
JOSH: finally you car is done. as bruce said its a good combination the OEm bumper and the replica kits togethere. GOOD JOB dude!!ITs all worth it. Btw is the rear diffuser you painted black?is the plastics an fiberglass can be attached together?I heard from my workers at my factory, they said its impossinle to attached together. Its weird huh?can you explain for that josh?
To attatch the plastic and fiberglass urethane adhesive and rivets were used and then everything was sanded down and filled to make it look like one piece.
#48
Super Member
Join Date: Feb 2003
Location: Washington
Posts: 521
Likes: 0
Received 0 Likes
on
0 Posts
MB
Originally posted by jimmydagreek
Sweet Benz dronellis! I have seen the pic. in your sig. before and forgot how tight your Benz looks! Anything new mods on it?
Sweet Benz dronellis! I have seen the pic. in your sig. before and forgot how tight your Benz looks! Anything new mods on it?
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#49
Super Member
Join Date: Feb 2003
Location: Washington
Posts: 521
Likes: 0
Received 0 Likes
on
0 Posts
MB
Originally posted by jimmydagreek
Sweet Benz dronellis! I have seen the pic. in your sig. before and forgot how tight your Benz looks! Anything new mods on it?
Sweet Benz dronellis! I have seen the pic. in your sig. before and forgot how tight your Benz looks! Anything new mods on it?
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)