Parting CLK55 - good parts left
#28
clk part out .
[QUOTSE=loggato;7604034]I have all the ECU/EIS stuff but none of it is functional anymore. I pulled the entire engine and dash harness to make a standalone ECU/harness for an engine swap, but fell short when the EIS failed to stay working. (SDS says so). I also did quite a bit of modifying to get them to work (no ESL, modified the EIS to turn without it). and yes, the project was successful! engine running with ECU and harness outside of the car!
The car never had an undertray, both fender liners are in bad shape. I dont recall any bumper mount brackets- I will have to have another look at it. Cluster is sold already. Sorry for all the bad news!! It seems like all the stuff that could get worn out has got worn out on this one too![/QUOTE]
The car never had an undertray, both fender liners are in bad shape. I dont recall any bumper mount brackets- I will have to have another look at it. Cluster is sold already. Sorry for all the bad news!! It seems like all the stuff that could get worn out has got worn out on this one too![/QUOTE]
#31
Member
Thread Starter
#32
Member
Thread Starter
Thanks
#33
That's fine. No real rush, it still works but I'd like to replace sooner rather than later. In addition, if the complete steering wheel is still available, I'd also be interested.
Thanks!
Thanks!
#37
Member
Thread Starter
#39
I'm still seeking the triangular tweeter covers. Also the driver mirror is hanging loose, but the glass part is ok. Do you have the frame part, or the whole mechanism, if it's easier to swap in and out? Thanks.
#40
Member
Thread Starter
the mirror got sold long ago. Where are the tweeter covers at? i'm not seeing any on the door panel.
#41
Member
Thread Starter
I have the passenger side. I'll keep an eye out for the drivers side, but I do believe it's sold already. Sorry.
#42
#44