Anti theft
Thread Starter
Newbie
Joined: Oct 2024
Posts: 3
Likes: 0
Clk430
Anti theft
New member here in massive need of help I installed a new motor and transmission in my CLK 430 and now I cannot get it to crank due to antitheft system. It will crank over, but it won’t continue running. It cuts off immediately. What am I missing? What I’ll do I need to transfer over. Any help would be greatly appreciated.
Last edited by jasongong; Oct 27, 2024 at 09:54 PM.
Thread Starter
Newbie
Joined: Oct 2024
Posts: 3
Likes: 0
Clk430
Yes I’m getting spark it will turn over and run for a second or two then cut off. If I put fuel into the throttle body I ll run until that’s gone fuel pump is operating but I have not idea psi. Filter is new and on correctly. Just wondered my if there was a security issue that would cause this t to do this. Thanks for the help
Thread Starter
Newbie
Joined: Oct 2024
Posts: 3
Likes: 0
Clk430
Last edited by jasongong; Nov 3, 2024 at 02:02 PM.
Member
Joined: Jun 2024
Posts: 118
Likes: 22
From: Midwest
CLK 430
Check this thread for diagnosis: https://www.benzworld.org/threads/cl...olved.1722571/
it looks like since you achieved starter engagement, all items are “ok” from a security standpoint, assuming this post is correct. You might recheck the shifter to TCU connection and as well potentially upgrade the shifter to make sure the PRND signal is sending correctly.
Andy
it looks like since you achieved starter engagement, all items are “ok” from a security standpoint, assuming this post is correct. You might recheck the shifter to TCU connection and as well potentially upgrade the shifter to make sure the PRND signal is sending correctly.
Andy
