directordat

i found a site that sells it for $1292 shipped just trying to see if i can find it cheaper.

dynomite05

Is that for just wheels or wheels/tires?

directordat

just the wheels brand new

dariusf

sounds like a very good deal, I love my set

directordat

what size tires are you running?

dariusf

225/35/19 Toyo FZ4
255/35/19 Bridgestone Potenza RE050
3mm spacers on front

dynomite05

D, any reason why you didn't go with 265 in the rear? Also people usually go with a 30 sidewall, hows that 35? Comfortable?

dariusf

Quote:

Originally Posted by dynomite05

D, any reason why you didn't go with 265 in the rear? Also people usually go with a 30 sidewall, hows that 35? Comfortable?

I purchased these wheels with the tires a set from previous owner (coin) so he picked the config for me The reason he had this setup was do to his lowering with cut Eibach springs. I still need to research what missing parts I have for my set of the PSS9s and get them on. At least with the coilovers I will be able to adjust for a perfect fit. I have no issues with the comfort level on 35s now and its quite low. The monarchs have lips folding out so I think 30s might be too aggressive putting the edge of the rim very close to the pavement.

directordat

So what tires do yall recommend me getting for comfort and also looks?

dynomite05

Hankook V12 Evo's, they are great! Best wheels I have tried and they are reasonably priced..

dariusf

Bridgestone Potenza RE050 are great, quiet, great traction in all conditions and they are run flats so you can drive up to some speed with no air in them. The negative is they are a bit pricey at about $350 mounted. Check Tire Rack for pricing and reviews.

M-bENZ

Totally agreed on that...bought a pair for my rear and also just drove 1200 miles on the last days too. They are great .

Andy

dynomite05

lol, I bought my Brembos from Coin..The PSS9's are awesome, you're going to enjoy them. I could check on the missing parts if you send me the pics.

dariusf

and I got your old breaks from you I was thinking about his breaks but my winter wheels stopped me

dynomite05

lol, I have to get new winter wheels now...

directordat

i tried searching for the v12's how much did you buy all 4 for? i'll probably just get some used ones because i plan on selling my car

dynomite05

They were cheap, I don't remember the exact price though. Check Tirerack, they have good prices for the Hankooks.

FatTony001

I have Vredestein tires
225/35-19
265-30-19

Great tires and combo for these wheels

directordat

Does anyone know how many mm out rear hub is? Around 7?

And is it just my car or is everyone elses clk have like a 2 inch hub in the front so it's hard to have hubcentric spacers

dynomite05

You have to get the correct spacers front and rear. H&R has the part numbers listed on their website. Only 10mm and up is hubcentric. The front spacers have a cap.

directordat

Front spacers or hub have a cap? Confused

directordat

Here's my problem I put the monarchs on but when I drive slowly it scratches the calipers so that means I need spacers..the hub on the rear looks like it's about 7mm..if I get 10mm hubcentric will it not touch the calipers anymore

and also the front hubs like I said are 2 inches long..sorry I think hub is the part sticking out on the car? Or is that the bore? But when I bought 15mm spacers for the front it didn't slide in all the way..

dynomite05

This is what the front spacers look like.

directordat

I see now..thanks