Interior light
#102
Super Member
Thread Starter
Join Date: May 2006
Location: Saint Louis
Posts: 872
Likes: 0
Received 2 Likes
on
1 Post
CLS 63 S AMG , s500,clk550
i called renntech to see if they have a cold air intake, hasnt called me back yet...
if thats the case, ill just skip the cold air intake for now and do the other mods
if thats the case, ill just skip the cold air intake for now and do the other mods
#103
Super Member
Join Date: May 2010
Location: Las Vegas, NV
Posts: 766
Likes: 0
Received 8 Likes
on
4 Posts
2012 CLS 550 Launch Edition, 2004 CLK 500, 2004 Honda Civic
So...pretty much the only bulbs that are left to swap are my glovebox, reverse lights, front turn signal and side view turn mirror signal bulb. The glovebox bulb is easy enough with a 6418 bulb, but how do I do the side view mirror turn signal bulb? How do I take the plastic cover off and what bulbs go in there?
As for the front turn signal does it accept led's or will it throw a code or not work properly? Also, what about the reverse lights will it accept led's or throw a code/ not work at all?....these should all have resistors too, will that help?
Lastly, for the low beam, high beam and fog light bulbs they won't accept led's at all?....not even with resistors?
Thanks for any help...
Angelo
As for the front turn signal does it accept led's or will it throw a code or not work properly? Also, what about the reverse lights will it accept led's or throw a code/ not work at all?....these should all have resistors too, will that help?
Lastly, for the low beam, high beam and fog light bulbs they won't accept led's at all?....not even with resistors?
Thanks for any help...
Angelo
#104
MBWorld Fanatic!
Glove box is pretty easy yes.
As far as mirror turn signals i have never seen that before being done... Those are already LED's
Fog lights i have tried but failed so i went with HID's
Low beam? Dont you already have that HID (sig)
Reverse lights would prob be same as fogs also the high beam. I remember Dyno here tried that but it didnt work either...
As far as mirror turn signals i have never seen that before being done... Those are already LED's
Fog lights i have tried but failed so i went with HID's
Low beam? Dont you already have that HID (sig)
Reverse lights would prob be same as fogs also the high beam. I remember Dyno here tried that but it didnt work either...
#105
Super Member
Join Date: May 2010
Location: Las Vegas, NV
Posts: 766
Likes: 0
Received 8 Likes
on
4 Posts
2012 CLS 550 Launch Edition, 2004 CLK 500, 2004 Honda Civic
Well I want to change my front turn signal, glovebox, side view mirror turn signal all to red to match my already red interior...get the theme?...lol...
As for my headlights they're actually bulbs, but I found this company that has extremely bright bulbs that are reliable too...
I don't know if Dyno tried his low beams, reverse lights, fogs, etc. with resistors or if he just used regular led's...i really want to change the reverse lights...have done it on previous cars...looks great and how often am I in reverse?...haha...
Angelo
As for my headlights they're actually bulbs, but I found this company that has extremely bright bulbs that are reliable too...
I don't know if Dyno tried his low beams, reverse lights, fogs, etc. with resistors or if he just used regular led's...i really want to change the reverse lights...have done it on previous cars...looks great and how often am I in reverse?...haha...
Angelo
#106
MBWorld Fanatic!
I feel you on the reverse lights. I want mine LED too. I tinted my white part and the output of the white has decreased. Before i was able to see in the back from the bulb and now i cant but i am sure a LED would do the trick...
Red side mirrors would actually be GREAT i never thought of that. let us know if you find anything
Red side mirrors would actually be GREAT i never thought of that. let us know if you find anything
#107
Out Of Control!!
Join Date: Apr 2008
Location: Jerzy
Posts: 10,275
Likes: 0
Received 9 Likes
on
9 Posts
04 CLK 320 > CLK32K
The mirror turn signal is sealed. When an led goes out, you have to replace the entire piece. Unless you could get it open, or replace the entire plastic, you can't change them. I have tried fog/reverse lights and they don't work without wiring resistors. I haven't tried the low beams, but I would imagine it's the same result. If you can do the wiring you shouldn't have a problem.
#108
Super Member
Join Date: May 2010
Location: Las Vegas, NV
Posts: 766
Likes: 0
Received 8 Likes
on
4 Posts
2012 CLS 550 Launch Edition, 2004 CLK 500, 2004 Honda Civic
Hmmm...a new piece it may be...they can't be that expensive...lol...
As for the reverse lights I could probably find some with resistors already in them so I should be able to do that.
What about the front turn signal you think that'll need resistors?...
As for the reverse lights I could probably find some with resistors already in them so I should be able to do that.
What about the front turn signal you think that'll need resistors?...
#110
MBWorld Fanatic!
Join Date: Jul 2010
Location: A Canadian in Dubai, United Arab Emirates
Posts: 4,748
Likes: 0
Received 0 Likes
on
0 Posts
'05 C200K SS, '05 Kleemann CLK500K, '08 Hummer H3 & '92 Z34 5sp (track car in Canada)
A great air intake system might reward you with 5hp, nothing whatsoever in regards to 1/4 mile time reduction. A E55K setup is a nice add on, beyond that, no real/actual worthwile gains - look at Klinhs numbers for proof. I'll be doing the same in a few months.
#111
Member
Join Date: Dec 2010
Location: New Jersey
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
clk, Lexus RX 350
I tried to put switchbacks in my front turn signal. so the turn signal is always on but white and when i turn it blinks orange. stupit car wont turn on the constant white part of the bulb when not in blinking mode. saw a diagram to rewire the housing seems easy. but looks really nice when its working. u have the white blinkers always on then ur hid low and hid fogs all white. very clean =)
#113
MBWorld Fanatic!
I tried to put switchbacks in my front turn signal. so the turn signal is always on but white and when i turn it blinks orange. stupit car wont turn on the constant white part of the bulb when not in blinking mode. saw a diagram to rewire the housing seems easy. but looks really nice when its working. u have the white blinkers always on then ur hid low and hid fogs all white. very clean =)
#114
Member
Join Date: Dec 2010
Location: New Jersey
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
clk, Lexus RX 350
right now its just plain old orange led blinkers. but once i get the white part of the switchbacks working sure. Probably get it done this weekend. but till then i had $40 orange led blinkers -_- wtf lol. My friends acura TL didnt need any wiring. weird.
#115
Junior Member
Join Date: Jun 2009
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
2003 clk 320 (w209)
Just lurking around, question though.
Do the interior leds actually dim like halogen bulbs? Or do they come on abruptly?
I love the red/tan theme you got there newjd, nice job.
Do the interior leds actually dim like halogen bulbs? Or do they come on abruptly?
I love the red/tan theme you got there newjd, nice job.
#117
Got the blue ones and they don't look too bad. I really like em on mine cuz of the black ext and light grey int. It turn the light grey almost white. take a look and tell me what u think.
#120
Thanks! I had ordered them after I saw this thread and was kinda nervous to put them in. No I got them here.
http://store.ijdmtoy.com/Mercedes-Benz-W209-CLK-SMD-LED-Car-Interior-Lights-p/pkg_euro_smd_25.htm
I think they'll look even better once I get the ext lighting the way I want it...
http://store.ijdmtoy.com/Mercedes-Benz-W209-CLK-SMD-LED-Car-Interior-Lights-p/pkg_euro_smd_25.htm
I think they'll look even better once I get the ext lighting the way I want it...